[Binding Position]

[Left Bind]

Set the binding position.

[Right Bind]

[Top Bind]

[Staple]^*1*2

Set the binding position and pitch for stapling.

[Divide Output]^*3

Divide a job for printing.

• Range: 1 to 9,999

[Punch]^*2*4

Sets the number of punch holes.

[Fold]^*5

Set the fold type.

[Folding Direction]^*5*6

[Inside]

Set the folding direction of printouts.

[Outside]

[Fold and Staple]^*7

[Off]

Set the Fold & Staple method for Multi Half-Fold.

• If you select the [Trim] check box, you can arrange the printout finishing by trimming both edges of paper.

• Setting [Fold and Staple] or [Trim] automatically sets [Fold] to [Multi Half-Fold].

Number of staples

[Trim]

[Trimming Profile]^*8*9

[Off]

Select a trimmer profile to use when trimming paper.

If [Interleaving Paper for Card Cutting] is set, you can insert partition paper and divide the output cards by job or copy when using the trimmer profile in card cutting mode.

• Click to update the contents of this menu list.

Trimmer profile list

[Interleaving Paper for Card Cutting]

[Trimming Profile for Cover]^*8*10

[Off]

Set a trimmer profile to use when trimming a cover.

• Click to update the contents of this menu list.

Trimmer profile list

[Reverse the Paper in Trimmer Unit]^*9*11

If you select this check box, the paper is reversed in the trimmer unit before it is output.

[Output Tray]

Output tray list

Set the output tray.

• Selecting [Default] outputs to the default output tray.

[Feed Direction]

[Auto]

Set the paper feed direction.

[Long Edge]

[Short Edge]

[Output Order]

[Face Up]

Set the print side orientation or the output order to output a job.

• For details about the setting and output method in [Output Order], refer to [Output Order] Setting and Output Method.

[N to 1]

[Copies]

Sets the number of copies.

• Range: 1 to 9,999

• This function is displayed and available only in PS Plug-in Driver.

[Sort/Group]

[Sort]

Set the output method when printing multiple copies of a multi-page original.

• Select [Sort] to print 1 copy at a time.

• Select [Group] to print the original for each page.

• For details about how to output the paper, refer to Output Method When Printing Multiple Copies of a Multi-page Original..

[Group]

[Offset Output Copies]

Output paper while shifting the position for each specified number of copies.

This function is convenient when you want to copy multiple sets of a document because printouts are divided by each set.

• Range: 1 to 9,999

• For details about how to perform Offset Output Copies when printing original data 1 to 4, refer to Output Order of [Offset Output Copies] and [Offset Output Sheets].

[Offset Output Sheets]

Output paper while shifting the position for each specified number of sheets.

This function is convenient when you want to group multiple originals by each original because printouts are divided by each original.

• Range: 1 to 65,535

• For details about how to perform Offset Output Sheets when printing original data 1 to 4, refer to Output Order of [Offset Output Copies] and [Offset Output Sheets].

[Pile Setting]^*12

[Forbidden]

Specify whether to allow the next job to pile up on top of the previous job in the stacker when printing multiple jobs successively.

• Select [Allow (Next)] to only allow subsequent ejected print jobs to pile up.

• Select [Allow (Previous)] to only allow print jobs to pile up when another print job has already been ejected.

• If piling is forbidden, the next job cannot be printed until the current job is removed from the stacker.

[Allow (Next)]

[Allow (Previous)]

[Allow]

[External Finisher]

Configure this setting when using an external finisher.

[Needless Tab Ejection]

Configure settings to automatically output unnecessary tab paper to the output tray.

• This function is displayed and available only in AccurioPro Print Manager.

OFF

OFF

ON

OFF

ON

ON

OFF

OFF

ON

OFF

ON

ON

[Sort]

[Group]

1

2

Sort

3

2

Sort

4

3

Sort

4

3

Group

1

2

Sort

2

2

Sort