HomeIntroductionTurning the Power On or Off

Turning the Power On or Off

Power supply

This machine has two power switches: Power Switch outside the machine and Power key on the Control Panel.

No.

Name

Description

1

Power Switch

Press this switch when turning on or off the main power of this machine or restarting this machine.

2

Power key

Press this key to switch this machine to the Power Save mode. This function reduces power consumption and has a greater power saving effect.

For details, refer to Here.

  • While printing, do not turn the Power Switch off or press the Power key. Otherwise, it may lead to a paper jam.

  • If the Power Switch is turned off or the Power key is pressed while this machine is running, the system deletes the currently loaded data or communicating data as well as queued jobs.

Turning the Power Switch ON or OFF

  1. Connect the Power Cord to this machine.

  2. Connect the Power Cord to the power outlet.

  3. When turning the main power on, press of the Power Switch.

    The Start key lights up orange, and a screen appears to show that this machine is in the process of start-up.

    When the Start key changes to blue, this machine is ready to use.

  4. When turning the main power off, press of the Power Switch.

    • When restarting this machine, turn the Power Switch off and on again after 10 or more seconds have elapsed. Not doing so may result in an operation failure.

Operating the Power key (When using this machine in the factory default status)

Press the Power key to switch this machine to the Power Save mode.

The Power key can be used as a power save key to manually switch to Power Save mode. Power Save mode is classified into two modes: Low Power mode and Sleep mode.

  • Press the Power key to select whether to switch to Low Power or Sleep mode (default: [Low Power]). For details, refer to Here.

  • To use the Power key as a Sub Power Off key, change the Power key setting (default: [Power Save]). For details, refer to Here.

When the Power key is pressed, the status of this machine changes as shown below. Depending on how long the Power key is pressed, the state of the power save mode to be activated will differ.

Power key

Status of this machine

Status of LED

Description

Short press

Low Power mode

(Default value)

Flash:

Blue

Turns off the display of the Touch Panel to reduce power consumption.

This machine returns to the normal mode when it receives data or faxes or when the user operates the Touch Panel.

Sleep mode

Flash:

Blue

Provides power-saving effect higher than Low Power mode. A time required to return to the normal mode is longer than Low Power mode.

This machine returns to the normal mode when it receives data or faxes or when the user operates the Touch Panel.

Hold down

Sub Power OFF

Light up:

Orange

The power saving effect is the same as that of the sleep mode.

While the sub power is turned off, this machine can receive data or faxes, however, it cannot scan or print an original.

If data or faxes are received while the sub power is turned off, they are printed when the machine returns to the normal mode.

To enable the machine to return to the normal mode from the Sub Power Off status, press the Power key again.

  • You can specify whether to return this machine from Low Power mode or Sleep mode to the normal mode when a person or a person's hands get closer to the Touch Panel (default: [ON], adjustment value: [0]). For details, refer to Here.

  • To reduce power consumption during the standby mode, you can use the Power key as a Sub Power Off key. For details, refer to Here.