Network Tab: Print Manager Setting
Click Print Manager Setting on the menu of Network tab to display this screen.
Selects whether to use Print Manager. If you select ON from the Print Manager Settings, configure a connection setting.
To use Print Manager settings, select ON from the Print Manager Setting drop-down list.
If necessary, change the port number.
Select either Enable or Disable from the SSL Setting drop-down list. After this, specify the port number as needed.
Select Enable or Disable from the drop-down list of Redirect to Print Manager.
Enable: Enter Web "http:// (IP address of image controller)" in the URL field of the Web browser to access Print Manager.
Disable: Enter Web "http:// (IP address of image controller)" in the URL field of the Web browser to access Web Connection.
Click OK. Clicking Cancel cancels the setting.
Click OK on the setting complete screen.