HomeWeb Management ToolSpecifying the default PS print settings

Specifying the default PS print settings

Configure the PS print settings. Specify default settings for error information printing and the default settings of various profiles.

In the administrator mode, select [Print Setting] - [PS Setting], then configure the following settings.

Settings

Description

[Select Color]

Select colors for printing.

  • [Auto Color]: The color mode is automatically selected according to the original color.

  • [Full Color]: The original is printed in full color regardless of whether the original is in color or in black and white.

  • [Gray Scale]: The original is printed in black and white regardless of whether the original is in color or in black and white.

[Auto Color] is specified by default.

[PS Error Print]

Specify whether to print error information when an error occurs during PS rasterization.

[OFF] is specified by default.

[ICC Profile Settings]

Specify the default profile setting to be displayed in the printer driver.

If the details of [ICC Profile Settings] differ between the machine and the printer driver, the settings of the printer driver are given priority.

[Photo]

Select the default setting for RGB color and output profile for photographs.

[RGB Color]: [sRGB]/[Output Profile]: [Auto] are specified by default.

[Text]

Select the default setting for RGB color and output profile for text.

[RGB Color]: [sRGB]/[Output Profile]: [Auto] are specified by default.

[Figure/Table/Graph]

Select the default setting for RGB color and output profile for figures, tables, and graphs.

[RGB Color]: [sRGB]/[Output Profile]: [Auto] are specified by default.

[Simulation Profile]

Select the default setting for simulation profile.

If [Simulation Profile] is set to [Auto] while [PS Designer Settings] is set to [No], use a simulation profile based on your processing. For details on [PS Designer Settings], refer to Here.

[Auto] is specified by default.

[Auto Trapping]

Select whether to superimpose neighboring colors to print so as to prevent white space being generated around a picture.

Selecting [ON] prevents the generation of white lines at the boundaries of colors in graphs or figures.

[OFF] is specified by default.

[Black Overprint]

Select whether to print so as to prevent white space being generated around a black character or figure.

  • [Text/Figure]: Adjacent portion between a text and figure is overprinted with black. Use this setting when a white line appears around the black portion in a graph or figure.

  • [Text]: Black is overprinted on the adjacent colors in the text portion. Use this setting when a white line appears around the text.

  • [OFF]: The data is printed as is without overprinting with black.

[OFF] is specified by default.

[Brightness]

Adjust the brightness to print data from a computer.

To make adjustment, the adjustment value specified here is added to that of the brightness specified in the PS driver.

[0] is specified by default.

[Contrast]

Adjust the contrast to print data from a computer.

To make adjustment, the adjustment value specified here is added to that of the contrast specified in the PS driver.

[0] is specified by default.

[Saturation]

Adjust the saturation to print data from a computer.

To make adjustment, the adjustment value specified here is added to that of the saturation specified in the PS driver.

[0] is specified by default.

[Color Balance]

Adjust the color balance to print data from a computer.

To make adjustment, the adjustment value specified here is added to that of the color balance specified in the PS driver.

[0] is specified by default.