Configure

[Acquire Device Information]

Press this to detect an optional device installed on this machine.

• : Could acquire device information.

• : Could not acquire device information.

[Multi Folder]

Set the punch, PI cover sheet, and fold functions.

[Stacker]

Stack a large number of printed documents on a stacker.

A large number of printed sheets can be output to the Open Stacker Tray.

[Stapler]

Set this to use the staple function.

[Punch Kit]

Set this to use the punch function.

[Saddle Unit]

Set this to use functions such as [Multi Tri-Fold], [Multi Half-Fold], and [Fold and Staple].

[Cover Sheet Feeder]

Coated paper or other paper can be inserted to keep the heat from the main body from interfering.

[Saddle-Stitcher]

Set this to use functions such as [Fold and Staple], [Fold and Staple + Trim], and [Multi Half-Fold].

[Crease Unit]

You can use the crease function for fold processing.

[Spine Corner Forming Unit]

You can use the spine corner forming function for fold processing.

[2-Side Slitting Unit]

You can use the 2-side slitting function for fold processing.

[Perfect Binder]

Set this to use the perfect binder function.

[Envelope Fusing Unit]

Envelope print is available.

[Multi Hole Punch Unit]

Set this to use the multi-hole punch function.

[Ring Binder]

Set this to use the ring bind function.

[External Finisher]

Select this option to use the External Finisher.

[Relay Unit]

Select this option to use the Relay Unit or Intelligent Quality Optimizer.

[Paper Source Unit]

Select Tray 3 to 5, or Bypass tray as the paper tray.

[Acquire information at the start of driver]

Select this to acquire information when the driver starts.

[Destination Setting]

To check device option information of another main body, select [Specify IP address or printer name], then enter the IP address or printer name. This function is helpful when the driver has the destination set to another server instead of the main body.

[Secure Print Only]

Select this to allow only secure printing.

[Show Secure Print Dialog]

Select this option to display the [Secure Print] dialog box in which you can enter the ID and password for Secure Print when printing data.

[Allow Changing User Name]

Select this to allow the user name to be changed.

[Allow Changing User Authentication Password]

Select this to allow the user authentication password to be changed.

[MacOS Keychain]

User Name and Password can be registered with key chain access when setting User Authentication and Account Track.

• Only Mac OS are supported.

[Normalize PostScript]

Set this to use the applications that have their own PostScript driver based on a PPD.

• Only Windows OS are supported.

[Unit]

Select either [Metric] or [Imperial] for the units of measurement.

[Language]

Set a language.

• Only Windows OS are supported.

[Configure General Panel]

You can set the item to be displayed on the [General] tab.

[Customize Panel Display]

Specify the order to display panel icons to be displayed on the printer driver as well as whether to display them.

[SNMP Version]

Specify the SNMP (Simple Network Management Protocol) version.

[Read Community Name ]

Specify the community name. Reenter the community name for confirmation in Reenter field.

[Context Name]

Enter the context name.

[Read User Name]

Enter the user name.

[Security Level]

Specify the security level.

[Auth-Password]: The password is necessary to be authenticated.

[Auth-Password/Priv-Password]: The encrypted password is necessary to be authenticated.

[Read User Auth- Password]

Enter the auth-password. Reenter the auth-password for confirmation in Reenter field.

[Read User Priv- Password]

Enter the encryption password. Reenter the encrypted auth-password for confirmation in the Reenter field.