Settings and Adjustments
- Adjustments
- Function Overview
- List of Adjustment Menu Items
- Machine Adjustment
- Printer Adjustment
- Restart Timing Adjustment: Adjusting the Image Position of Lead Edge in Paper FeedDirection in the Printer
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction in thePrinter
- FD-Mag. Adjustment: Adjusting the Magnification in Paper Feed Direction in thePrinter
- CD-Mag. Adjustment: Adjusting the Magnification in Crosswise Direction in thePrinter
- Scan Adjustment
- Restart Timing Adjustment: Adjusting the Position to Start Scanning Originals
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction WhenScanning Originals
- FD-Mag. Adjustment: Adjusting FD-Mag. When Scanning Originals
- CD-Mag. Adjustment: Adjusting the CD-Magnification When Scanning Originals
- LPH Adjustment
- Printer Adjustment
- Finisher Adjustment (with Finisher FS-532)
- Staple Finisher (Main) Adjustment
- Staple Position Adjustment: Adjusting the Staple Positions
- Staple Paper Width Adj.: Adjusting the Staple Paper Width
- FD Alignment Plate Adj.: Adjusting the Insertion of the Alignment Unit of StapleStacker
- Exit Guide Paper Width Adj.: Adjusting the Width of Exit Guides of the Finisher
- Rewind Paddle Descent Adj.: Adjusting the Rewind Paddle Descent
- Rewind Function Operation: Selecting the Rewind Function Operation
- Upper Gripper Operation: Selecting Upper Gripper Operation
- Output Alignment Operation: Selecting Output Alignment Operation
- Staple Finisher (Fold) Adjustment
- Fold&Staple Pitch Adj.: Adjusting the Staple Pitch on Fold & Staple
- Fold&Staple Paper Width Adj.: Adjusting the Width of the Adjustment Plates in theSaddle Stitcher
- Fold&Staple Staple Position: Adjusting the Staple Positions on Fold &Staple
- Fold&Staple Fold Position: Adjusting the Folded Position in Fold & StapleMode
- Half-Fold Fold Position Adj.: Adjusting the Half-Fold Position
- Tri-Fold Position Adj.: Adjusting the Folded Positions in Multi Tri-Fold Mode
- Double Fold Plate Adjustment: Adjusting Double Fold Plate Insertion
- Half-Fold Strength Adj.: Making Roller Pressure Time Longer
- Staple Finisher (Punch) Adjustment
- Staple Finisher (PI) Adjustment
- Staple Finisher (Main) Adjustment
- Finisher Adjustment (Z-Folding Unit ZU-608 Mounted)
- ADF Adjustment
- ADF Original Stop Pos. Adj.: Adjusting the Position to Start Scanning on the ADF and theImage Position in the Crosswise Direction
- ADF Original Stop Pos. Auto: Automatically Adjusting the Position to Start Scanning on theADF and the Image Position in the Crosswise Direction
- FD-Mag. Adjustment: Adjusting FD-Mag. When scanning on the ADF
- FD-Mag. Auto Adjustment: Automatically Adjusting FD-Mag. When scanning on the ADF
- Home Read Position Adj(Back): Adjusting the Home Position of the Shading Shaft
- FD-Mag. Adjustment(Back): Adjusting the magnification in the paper feed direction on theback side when using the ADF
- FD-Mag. Auto Adj.(Back): Automatically adjusting the magnification in the paper feeddirection on the back side when using the ADF
- Main Scan Dir. Zoom(Back): Adjusting the magnification in the crosswise direction on theback side when using the ADF
- Main ScanDir.Zoom Auto(Back): Automatically adjusting the magnification in the crosswisedirection on the back side when using the ADF
- Size Memory Recovery Mode: Performing an Extra Rotation of the Drum
- Charge Manual Cleaning: Cleaning Charging Coronas
- Drum Memory Recovery Mode: Performing an Extra Rotation of the Drum
- Drum Refresh Mode: Refreshing the Surface of the Drum
- Gamma Automatic Adjustment: Performing the Automatic Gamma Adjustment
- Density Balance Auto. Adj.: Perform the density balance adjustment.
ADF Adjustment
This section describes about the ADF adjustment controlled on the control panel of this machine.
Choose the item you want to learn about from contents on the left.