Settings and Adjustments
- Adjustments
- Function Overview
- List of Adjustment Menu Items
- Machine Adjustment
- Printer Adjustment
- Restart Timing Adjustment: Adjusting the Image Position of Lead Edge in Paper FeedDirection in the Printer
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction in thePrinter
- FD-Mag. Adjustment: Adjusting the Magnification in Paper Feed Direction in thePrinter
- CD-Mag. Adjustment: Adjusting the Magnification in Crosswise Direction in thePrinter
- Scan Adjustment
- Restart Timing Adjustment: Adjusting the Position to Start Scanning Originals
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction WhenScanning Originals
- FD-Mag. Adjustment: Adjusting FD-Mag. When Scanning Originals
- CD-Mag. Adjustment: Adjusting the CD-Magnification When Scanning Originals
- LPH Adjustment
- Printer Adjustment
- Finisher Adjustment (with Finisher FS-532)
- Staple Finisher (Main) Adjustment
- Staple Position Adjustment: Adjusting the Staple Positions
- Staple Paper Width Adj.: Adjusting the Staple Paper Width
- FD Alignment Plate Adj.: Adjusting the Insertion of the Alignment Unit of StapleStacker
- Exit Guide Paper Width Adj.: Adjusting the Width of Exit Guides of the Finisher
- Rewind Paddle Descent Adj.: Adjusting the Rewind Paddle Descent
- Rewind Function Operation: Selecting the Rewind Function Operation
- Upper Gripper Operation: Selecting Upper Gripper Operation
- Output Alignment Operation: Selecting Output Alignment Operation
- Staple Finisher (Fold) Adjustment
- Fold&Staple Pitch Adj.: Adjusting the Staple Pitch on Fold & Staple
- Fold&Staple Paper Width Adj.: Adjusting the Width of the Adjustment Plates in theSaddle Stitcher
- Fold&Staple Staple Position: Adjusting the Staple Positions on Fold &Staple
- Fold&Staple Fold Position: Adjusting the Folded Position in Fold & StapleMode
- Half-Fold Fold Position Adj.: Adjusting the Half-Fold Position
- Tri-Fold Position Adj.: Adjusting the Folded Positions in Multi Tri-Fold Mode
- Double Fold Plate Adjustment: Adjusting Double Fold Plate Insertion
- Half-Fold Strength Adj.: Making Roller Pressure Time Longer
- Staple Finisher (Punch) Adjustment
- Staple Finisher (PI) Adjustment
- Staple Finisher (Main) Adjustment
- Finisher Adjustment (Z-Folding Unit ZU-608 Mounted)
- ADF Adjustment
- ADF Original Stop Pos. Adj.: Adjusting the Position to Start Scanning on the ADF and theImage Position in the Crosswise Direction
- ADF Original Stop Pos. Auto: Automatically Adjusting the Position to Start Scanning on theADF and the Image Position in the Crosswise Direction
- FD-Mag. Adjustment: Adjusting FD-Mag. When scanning on the ADF
- FD-Mag. Auto Adjustment: Automatically Adjusting FD-Mag. When scanning on the ADF
- Home Read Position Adj(Back): Adjusting the Home Position of the Shading Shaft
- FD-Mag. Adjustment(Back): Adjusting the magnification in the paper feed direction on theback side when using the ADF
- FD-Mag. Auto Adj.(Back): Automatically adjusting the magnification in the paper feeddirection on the back side when using the ADF
- Main Scan Dir. Zoom(Back): Adjusting the magnification in the crosswise direction on theback side when using the ADF
- Main ScanDir.Zoom Auto(Back): Automatically adjusting the magnification in the crosswisedirection on the back side when using the ADF
- Size Memory Recovery Mode: Performing an Extra Rotation of the Drum
- Charge Manual Cleaning: Cleaning Charging Coronas
- Drum Memory Recovery Mode: Performing an Extra Rotation of the Drum
- Drum Refresh Mode: Refreshing the Surface of the Drum
- Gamma Automatic Adjustment: Performing the Automatic Gamma Adjustment
- Density Balance Auto. Adj.: Perform the density balance adjustment.
Printer Adjustment
This section describes the printer adjustment.
Choose the item you want to learn about from contents on the left.