Layout

[2-Sided]

Off, On

Set this to perform a 2-sided printing. Whether to set the default of [2-Sided] to On or Off varies depending on the option that is selected when the driver is installed.

• This manual includes a page which describes how to finish 2-sided printing using sample files. For details, refer to 2-Sided Print.

[Imposition]

[Off], [Adhesive Binding], [Booklet], [2 in 1 (Full Size)], [4 in 1 (Full Size / Horizontal)], [4 in 1 (Full Size / Vertical)], [2 Repeat], [2 Repeat Reversal (Left)], [2 Repeat Reversal (Right)], [2 Repeat Reversal (Top)], [2 Repeat Reversal (Bottom)], [4 Repeat] ,[8 Repeat]

Set this to perform an imposition printing.

In [2 Repeat Reversal], [2 Repeat Reversal (Top)] and [2 Repeat Reversal (Bottom)] are available when [Original Orientation] is set to [Landscape].

• This manual includes a page which describes how to finish booklets using sample files. For details, refer to Booklet.

[Binding Position]

[Left Bind], [Right Bind], [Top Bind]

Set this to specify the binding position.

[Imposition Quality]

[Normal], [High Precision]

Set the imposition quality.

• This manual includes the pages which describe how to adjust the gutter (page interval) in book spread pages by using sample files. For details, refer to Book Spread Print.

[Page Interval]

-250 mm to 250 mm / -9.84" to 9.84"

Set the interval between book spread pages when setting the imposition function.

When selecting [High Precision] on the [Imposition Quality], you can enter the value of page interval by 0.01 mm / 0.01".

• This manual includes the pages which describe how to adjust the gutter (page interval) in book spread pages by using sample files. For details, refer to Book Spread Print.

[Creep Adjustment]

[Whole Offset]: 0 mm to + 50.0 mm / 0" to 1.97"

[Page Offset]: 0 mm to + 5.00 mm / 0" to 0.2"

Adjust the width of page intervals by considering the thickness of the folded [Booklet] so that the page interval becomes narrower the further the pages are to the center pages of the booklet.

In [Whole Offset], specify the offset amount based on the total number of pages.

In [Page Offset], specify the offset amount for each page.

[Booklet Cover Blank Page Insertion]

Off, On

Inserts a blank page in order to print the last page on the back cover of a booklet when the total number of pages is not a multiple of 4 in booklet printing.

[Booklet Splitting]

-

Input a number of pages to split a booklet.

It inserts a blank page automatically if the value for [Booklet Splitting] is not a multiple of 4.

[Book Spread]

Off, On

Prints original data of different paper sizes in book spread for a booklet.

• This manual includes the pages which describe how to complete book spread printing by using sample files. For details, refer to Book Spread Print.

[Combination]

[Off], [2-in-1], [2 in 1 (Reverse)], [4-in-1], [4 in 1 (Reverse)], [6-in-1], [6 in 1 (Reverse)], [8-in-1], [8 in 1 (Reverse)], [9-in-1], [9 in 1 (Reverse)], [16-in-1], [16 in 1 (Reverse)]

Combine more than one pages onto one sheet of paper for printing.

[Original Size]

The paper sizes registered as the standard paper sizes and custom sizes

Set a paper size of the original.

When you select the [PostScript Custom Page Size], the size specified by [Custom Size] is used.

In addition, when you register the Custom Paper Size Name using the [Custom Size] - [Custom Size Registration], you can also select the name of the size.

[Custom Size]

Enter or register the size.

You can specify the size as a [PostScript Custom Page Size]. As for the setting value to the [PostScript Custom Page Size], the entered value is also applied to the [PostScript Custom Page Size] in the [Paper Size]. The same value is applied to the [PostScript Custom Page Size] in the [Original Size] and [Paper Size]. Whichever value you enter later is applied to both of the settings.

In addition, when you want to register the name for the original size, you can register the name and the size in the [Custom Size Registration].

[Original Orientation]

[Portrait], [Landscape]

Set the orientation for the original.

[Paper Size]

The paper sizes registered as the standard paper sizes and custom sizes

Set a paper size.

When you select the [PostScript Custom Page Size], the paper size registered as [Custom Size] is used. In addition, when you register the Custom Paper Size Name using the [Custom Size] - [Custom Size Registration], you can also select the name of the size.

[Custom Size]

Specify or register the size.

You can register the size as a [PostScript Custom Page Size]. As for the setting value to the [PostScript Custom Page Size], the entered value is also applied to the [PostScript Custom Page Size] in the [Original Size]. The same value is applied to the [PostScript Custom Page Size] in the [Original Size] and [Paper Size]. Whichever value you enter later is applied to both of the settings.

In addition, when you want to register the name for the paper size, you can register the name and the size in the [Custom Size Registration].

[Fit to Paper Size]

Off, On

Use this setting to fit the printed document on the page when the original size is different from the paper size.

[Zoom]

1% to 1000%

Set an enlarge or reduce ratio.

[Full Bleed]

Off, On

Print in the original image without blank borders.

This function is available when [High Precision] on the [Imposition Quality] is selected.

[180° Rotate]

Off, On

Select On to rotate the document 180° to print.