Settings of this machine
Before you can use this machine through the network connection, you must configure the network settings for this machine.
You can set the network settings for this machine in the screen that is displayed by selecting [Utility/Utility] - [Administrator Setting] - [Network Setting] - [NIC Setting].
For details, refer to NIC Setting: Setting the Machine Network Information.
TCP/IP settings for this machine
In [TCP/IP Settings] of this machine, specify the IP address.
When this machine is connected through the network, you must previously set the IP address on this machine so that it can be detected automatically. For details, refer to NIC Setting: Setting the Machine Network Information.
RAW port number/IPP setting for this machine
Change the network settings for this machine according to the connection method or protocol.
Port 9100: In [TCP/IP Setting], enable the RAW port number (default setting: [9100]).
IPP/IPPS: In [HTTP Server Setting], enable IPP printing.
For details about TCP/IP settings and IPP settings of this machine, refer to NIC Setting: Setting the Machine Network Information.
Before you can use IPPS printing, you must register a certificate with this machine. You can use the self-signed certificate that is preinstalled in this machine.