Home ScanSettings Required to Use Scan to SMB

Settings Required to Use Scan to SMB

In order to send the scanned data to the SMB server, the following items need to be set.

Register Name

Enter a name of a destination.

If you register the name, it is displayed on the destination list.

Reference Name

Enter text to search for a destination.

If you register the text, you can use it to search for the destination.

Host Address

You specify an SMB server name or an IP address of the SMB server.

File Path

You specify a directory in the SMB server.

Login Name

You specify a Login Name for the SMB server.

Password

You specify a corresponding Password to each Login Name for the SMB server.

  • Depending on a network condition, transmission to the SMB server may damage the scan data. Be sure to check that the scan data are not damaged.