Available Operations in [Cover Mode]
In [Cover Mode], you can insert covers into the printouts and insert Transparency interleaves when printing on transparencies.
From the setting window, you can switch between the [Cover Mode] window and the [Transparency Interleave] window.
Setting | Description |
|---|---|
[Front Cover] | Select this check box to insert and print on a front cover. In addition, select the paper tray for the front cover and whether to print on the inserted front cover.
You can set this option when you have selected anything other than [Auto] in [Paper Tray] in [Paper Tray / Output Tray]. |
[Back Cover] | Select this check box to insert and print on a back cover. In addition, select the paper tray for the back cover and whether to print on the inserted back cover.
You can set this option when you have selected anything other than [Auto] in [Paper Tray] in [Paper Tray / Output Tray]. |
[Front Cover from Post Inserter] | Select this check box when inserting an outside front cover for printing while the optional Post Inserter is installed on the machine. In addition, select the PI tray for the front outside cover. You can set this option when you have selected anything other than [Auto] in [Paper Tray] in [Paper Tray / Output Tray]. |
[Back Cover from Post Inserter] | Select this check box when inserting an outside back cover for printing while the optional Post Inserter is installed on the machine. In addition, select the PI tray for the back outside cover. You can set this option when you have selected anything other than [Auto] in [Paper Tray] in [Paper Tray / Output Tray]. |
[Transparency Interleave] | When printing on multiple transparencies, select this check box if you want to insert paper between the transparencies. In addition, select the paper tray for the paper to be inserted. You can set this option when you have selected [Transparency] in [Paper Type] in [Paper Tray / Output Tray]. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.