* Enter the name of the utility key. You can search descriptions of utility keys.
Line Parameter Setting
To display: [Utility][Administrator Settings][Fax Settings][Line Parameter Setting]
Configure the environment to use fax functions on this machine, such as the types of telephone lines (dialing method) and fax receive mode.
Settings | Description |
|---|---|
[Dialing Method] | Select the line type according to your environment. For details, refer to [Dialing Method] . |
[Receive Mode] | Select a receive mode. For details, refer to [Receive Mode] . |
[Number of RX Call Rings] | If necessary, change the number of times the phone rings before automatically receiving a fax. For details, refer to [Number of RX Call Rings] . |
[Number of Redials] | If the machine fails to send a fax successfully, it automatically redials the same destination after the elapse of a certain period of time. If necessary, change the number of redials. For details, refer to [Number of Redials] . |
[Redial Interval] | If necessary, change the redial intervals when you specified a value in [Number of Redials]. For details, refer to [Redial Interval] . |
[Line Monitor Sound] | Select whether to play sounds on the telephone line from speakers during fax communication. For details, refer to [Line Monitor Sound] . |
[Line Monitor Sound Volume (Send)] | Monitors sounds output from the machine. Specify the monitor sound volume between 0 and 8. For details, refer to [Line Monitor Sound Volume (Send)] . |
[Line Monitor Sound Volume (Receive)] | Monitors sounds output from the recipient, including switching equipment or TA. Specify the monitor sound volume between 0 and 8. For details, refer to [Line Monitor Sound Volume (Receive)] . |
[Manual RX V34 Settings] | Select whether to cancel the V.34 function when manually receiving a fax. For details, refer to [Manual RX V34 Settings] . |
[Ring Detection Pattern] | Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used. For details, refer to [Ring Detection Pattern] . |
Line Monitor Sound Volume (Send)