* Enter the name of the utility key. You can search descriptions of utility keys.

Multi Line Settings

When multiple lines are used, specify the method to use each line.

Settings		Description
[PC-Fax TX Line Setting]		Select the line used for PC-Fax TX. If [No Selection] is selected, either line, whichever is not busy, is used for transmission. [No Selection] is specified by default.
[Fax Line]		Configure the setting required to use multiple lines.
	[Line Parameter Setting]	Configure your environment for using fax functions in multiple lines. [Dialing Method]: Select the line type according to your environment. [Number of RX Call Rings]: If necessary, change the number of times the phone rings before automatically receiving a fax. [2 x] is specified by default. [Line Monitor Sound]: Select whether to play sounds on the telephone line from speakers during fax communication. [OFF] is specified by default. [Manual RX V34 Settings]: Select whether to cancel the V.34 function when manually receiving a fax. [OFF] is specified by default.
	[Function Settings]	Enable or disable functions that are used for multiple lines. [Number Display Function]: Select whether to use the Number Display function. [OFF] is specified by default.
	[Multi Line Settings]	Select one of [TX Only], [RX Only], and [TX and RX] as the multi line usage. [TX and RX] is specified by default.
	[Sender Fax No.]	Enter the fax number for the multiple lines (a number containing up to 20 digits, with available symbols being #, *, + and space). The fax number you entered is printed as the sender information.