Cleaning This Machine
Cleaning the Slit Scan Glass
In bizhub C368/C308/C258, perform this procedure when the Reverse Automatic Document Feeder DF-629 or Dual Scan Document Feeder DF-704 is installed on the machine.
Open the ADF.
Wipe stains off the Slit Scan Glass using a dry and clean cloth.
NOTICE
Do not touch the Slit Scan Glass.
Cleaning the Slit Scan Glass (back)
In bizhub C368/C308/C258, perform this procedure when the Dual Scan Document Feeder DF-704 is installed on the machine.
Open the ADF.
Open the Opening and Closing Guide.
Release the lock lever of the Opening and Closing Guide, and open the Opening and Closing Guide.Wipe stains off the Slit Scan Glass (back) using a dry and clean cloth.
NOTICE- Do not touch the Slit Scan Glass (back).
Close the Opening and Closing Guide opened in Step 2.
Press the Hand mark in the center of the Opening and Closing Guide, and check that the Opening and Closing Guide is locked securely.
Cleaning the Original Glass, Control Panel, Roller, and Output Belt
Wipe the surface using a soft, dry cloth.
NOTICE- Do not press the Control Panel hard, otherwise the keys and Touch Panel may be damaged.
Tips- When cleaning the Output Belt, make sure that the Finisher FS-537 and Saddle Stitcher SD-512 are installed on this machine.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
Cleaning the outer covers and Original Pad
Wipe the surface using a soft cloth moistened with a mild household detergent.
NOTICE- Never use solvents, such as benzene or thinner, to clean the Original Pad.
