Printing without password (Quick authentication)

Overview

Configure settings so that authentication (without a password) based only on the user name is allowed when the printer driver is used for printing in an environment where user authentication is employed. This function is called the quick authentication.

When using the quick authentication, follow the below procedure to configure the settings.

  1. Permit the quick authentication

    supplementary explanationFor details on configuring the setting, refer to [Permitting the quick authentication] .

  2. Register information of the LDAP server for confirming the user name (quick authentication server) in an environment where external server authentication is employed

    supplementary explanationFor details on configuring the setting, refer to [Registering the quick authentication server] .

  3. Set the following options according to your environment

    Purpose

    Reference

    Communicate with the LDAP server using SSL

    [Using SSL communication]

    Provide against shutdown of the quick authentication server

    [Setting a secondary authentication server against shutdown of the quick authentication server]

Permitting the quick authentication

Permit the quick authentication. By this, you can print data from the printer driver only based on user name authentication (without a password) in an environment where MFP authentication is employed.

In the administrator mode, select [User Auth/Account Track] - [Simple Authentication Setting] - [Simple Authentication Setting], and then set [Simple Authentication Setting] to [Allow] (default: [Restrict]).

Registering the quick authentication server

You must inquire the LDAP server about the user name to obtain permission to access this machine in an environment where external server authentication is employed. This LDAP server is called the quick authentication server.

In the administrator mode, select [User Auth/Account Track] - [Simple Authentication Setting] - [Register Simple Authentication Server] - [Edit], then register information of the quick authentication server.

Settings

Description

[Server Address]

Enter the LDAP server address.

Use one of the following formats.

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Port No.]

If necessary, change the LDAP server port number.

In normal circumstances, you can use the original port number.

[389] is specified by default.

[Search Base 1] to [Search Base 3]

Specify the starting point and range to search for a user to be authenticated.

  • [Search Base]: Specify the starting point to search for a target (using up to 255 characters).
    Example of entry: "cn=users,dc=example,dc=com"

  • [Search Range]: Select a tree search range. [Full Tree] is specified by default.
    Selecting [Full Tree] makes a search, including the tree structure under the entered starting point. Selecting [Next hierarchy only] searches for only one level directly beneath the entered starting point. In this case, the level at the starting point is not included as a search target.

[Timeout]

If necessary, change the time-out time to limit a communication with the LDAP server.

[60] sec. is specified by default.

[General Settings]

Select the authentication method to log in to the LDAP server.

Select one appropriate for the authentication method used for your LDAP server.

  • [Simple]

  • [Digest-MD5]

  • [GSS-SPNEGO]

  • [NTLM v1]

  • [NTLM v2]

[Simple] is specified by default.

[Login Name]

Log in to the LDAP server, and enter the login name to search for a user (using up to 64 characters).

[Password]

Enter the password of the user name you entered into [Login Name] (using up to 64 characters, excluding ").

To enter (change) the password, select the [Password is changed.] check box, then enter a new password.

[Domain Name]

Enter the domain name to log in to the LDAP server (using up to 64 characters).

If [GSS-SPNEGO] is selected for [General Settings], enter the domain name of Active Directory.

[Use Referral]

Select whether to use the referral function, if necessary.

Make an appropriate choice to fit the LDAP server environment.

[ON] is specified by default.

[Search Attribute]

Enter the search attribute to be used for search of user using the LDAP server (using up to 64 characters, including a symbol mark -).

The attribute must start with an alphabet character.

[uid] is specified by default.

[External Server Connection]

Select the external server name to be used as a part of user information from the external servers registered on this machine when authentication succeeds on the quick authentication server.

The external server selected here is used for the following purpose.

  • Using as a part of authentication information saved on this machine

  • Using for restricting the functions of this machine or managing the maximum allowance

[No Selection] is specified by default.

Using SSL communication

Communication between this machine and the LDAP server is encrypted with SSL.

Configure the setting if your environment requires SSL encryption communication with the LDAP server.

In the administrator mode, select [User Auth/Account Track] - [Simple Authentication Setting] - [Register Simple Authentication Server] - [Edit], then configure the following settings.

Settings

Description

[Enable SSL]

Select this check box to use SSL communication.

[OFF] (not selected) is specified by default.

[Port No.(SSL)]

If necessary, change the SSL communication port number.

In normal circumstances, you can use the original port number.

[636] is specified by default.

[Certificate Verification Level Settings]

To verify the certificate, select items to be verified.

If you select [Confirm] at each item, the certificate is verified for each item.

[Expiration Date]

Confirm whether the certificate is still valid.

[Confirm] is specified by default.

[CN]

Confirm whether CN (Common Name) of the certificate matches the server address.

[Do Not Confirm] is specified by default.

[Key Usage]

Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer.

[Do Not Confirm] is specified by default.

[Chain]

Confirm whether there is a problem in the certificate chain (certificate path).

The chain is validated by referencing the external certificates managed on this machine.

[Do Not Confirm] is specified by default.

[Expiration Date Confirmation]

Confirm whether the certificate has expired.

Confirm for expiration of the certificate in the following order.

  • OCSP (Online Certificate Status Protocol) service

  • CRL (Certificate Revocation List)

[Do Not Confirm] is specified by default.

Setting a secondary authentication server against shutdown of the quick authentication server

When you are using the quick authentication server, you can set a secondary authentication server to prepare for a case in which the primary authentication server has shut down.

Setting a secondary authentication server automatically changes to the secondary authentication server even if the primary authentication server used for normal operations has shut down, thereby, enabling the quick authentication to be continued.

  1. In the administrator mode, select [User Auth/Account Track] - [Simple Authentication Setting] - [Secondary Authentication Server Settings], then configure the following settings.

    Settings

    Description

    [Secondary Authentication Server Settings]

    Select [ON] to use the secondary authentication server.

    [OFF] is specified by default.

    [Reconnection Settings]

    Specify the timing at which to reconnect to the primary authentication server.

    [Set Reconnect Interval] is specified by default.

    • [Reconnect for every login]: Connects to the primary authentication server each time authentication is carried out on this machine. If the primary authentication server is shutting down, this machine is connected to the secondary authentication server.

    • [Set Reconnect Interval]: Connects to the secondary authentication server when the primary authentication server is shutting down when machine authentication is occurring. After this, this machine is connected to the secondary authentication server when machine authentication is occurring until the time specified in [Reconnection Time] lapses. After the time specified in [Reconnection Time] has lapsed, this machine is reconnected to the primary authentication server when machine authentication is occurring.

  2. In the administrator mode, select [User Auth/Account Track] - [Simple Authentication Setting] - [Register Secondary Authentication Server], then click [Edit] to configure the following settings.

    Settings

    Description

    [Server Address]

    Enter the LDAP server address.

    Use one of the following formats.

    • Example of host name entry: "host.example.com"

    • Example of IP address (IPv4) entry: "192.168.1.1"

    • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

    [Port No.]

    If necessary, change the LDAP server port number.

    In normal circumstances, you can use the original port number.

    [389] is specified by default.

    [Search Base 1] to [Search Base 3]

    Specify the starting point and range to search for a user to be authenticated.

    • [Search Base]: Specify the starting point to search for a target (using up to 255 characters).
      Example of entry: "cn=users,dc=example,dc=com"

    • [Search Range]: Select a tree search range. [Full Tree] is specified by default.
      Selecting [Full Tree] makes a search, including the tree structure under the entered starting point. Selecting [Next hierarchy only] searches for only one level directly beneath the entered starting point. In this case, the level at the starting point is not included as a search target.

    [Timeout]

    If necessary, change the time-out time to limit a communication with the LDAP server.

    [60] sec. is specified by default.

    [General Settings]

    Select the authentication method to log in to the LDAP server.

    Select one appropriate for the authentication method used for your LDAP server.

    • [Simple]

    • [Digest-MD5]

    • [GSS-SPNEGO]

    • [NTLM v1]

    • [NTLM v2]

    [Simple] is specified by default.

    [Login Name]

    Log in to the LDAP server, and enter the login name to search for a user (using up to 64 characters).

    [Password]

    Enter the password of the user name you entered into [Login Name] (using up to 64 characters, excluding ").

    To enter (change) the password, select the [Password is changed.] check box, then enter a new password.

    [Domain Name]

    Enter the domain name to log in to the LDAP server (using up to 64 characters).

    If [GSS-SPNEGO] is selected for [General Settings], enter the domain name of Active Directory.

    [Use Referral]

    Select whether to use the referral function, if necessary.

    Make an appropriate choice to fit the LDAP server environment.

    [ON] is specified by default.

    [Search Attribute]

    Enter the search attribute to be used for search of user using the LDAP server (using up to 64 characters, including a symbol mark -).

    The attribute must start with an alphabet character.

    [uid] is specified by default.

  3. If a communication with the LDAP server is encrypted using SSL, select [User Auth/Account Track] - [Simple Authentication Setting] - [Register Secondary Authentication Server] in the administrator mode, then click [Edit] to configure the following settings.

    Settings

    Description

    [Enable SSL]

    Select this check box to use SSL communication.

    [OFF] (not selected) is specified by default.

    [Port No.(SSL)]

    If necessary, change the SSL communication port number.

    In normal circumstances, you can use the original port number.

    [636] is specified by default.

    [Certificate Verification Level Settings]

    To verify the certificate, select items to be verified.

    If you select [Confirm] at each item, the certificate is verified for each item.

    [Expiration Date]

    Confirm whether the certificate is still valid.

    [Confirm] is specified by default.

    [CN]

    Confirm whether CN (Common Name) of the certificate matches the server address.

    [Do Not Confirm] is specified by default.

    [Key Usage]

    Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer.

    [Do Not Confirm] is specified by default.

    [Chain]

    Confirm whether there is a problem in the certificate chain (certificate path).

    The chain is validated by referencing the external certificates managed on this machine.

    [Do Not Confirm] is specified by default.

    [Expiration Date Confirmation]

    Confirm whether the certificate has expired.

    Confirm for expiration of the certificate in the following order.

    • OCSP (Online Certificate Status Protocol) service

    • CRL (Certificate Revocation List)

    [Do Not Confirm] is specified by default.

Tips
  • To check the status of the connection of the primary authentication server and the secondary authentication server, select [User Auth/Account Track] - [Primary/Secondary Server Connection Status] - [Simple Auth.] in the administrator mode. If [Connection Allowed] is displayed, you can connect to both the primary and secondary authentication servers.