Saving the Scanned Original Data to a USB Flash Drive

Select [Utility] - [Administrator] - [System Settings] - [User Box Setting] - [USB flash drive function settings], and set [Save Document] to ON to permit saving a file in a USB flash drive. To prevent data leakage, saving a file in a USB flash drive is prohibited by default.

When user authentication is enabled, select [Utility] - [Administrator] - [User Auth/Account Track] - [User Authentication Setting] - [User Registration], and permit saving a file in a USB flash drive for each registered user.

1

Load the original.

• When loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.

2

Connect the USB flash drive to the USB port of this machine.

NOTICE

• When this machine is starting up, do not connect or disconnect the USB flash drive to/from the USB port.

3

When the basic style screen is displayed, tap the notification icon at the top of the screen to display the [Information] screen.

4

Tap [Save a document to External Memory.].

• You can also perform the same operation by tapping [System] - [External Memory] - [Save] in User Box mode.

5

Specify options to save a file as needed.

• For details on option settings, refer to Storage Option Settings.

6

Use the Start key to start saving.

7

When the operation is complete, remove the USB flash drive from the port of this machine.

When you use files stored on the USB flash drive on the computer, just connect the USB flash drive to the USB port of the computer.