Associating This Machine with an iOS Terminal Using Bluetooth LE
Enabling the Bluetooth LE function of this machine
The Bluetooth LE is the standard for power-saving near-field communication that is used for connection between handheld terminals or other devices several meters away each other.
Configure a setting to support Bluetooth LE on this machine. If you move the iOS terminal closer to this machine, you can connect the iOS terminal to this machine easily using the application.
Select [System Settings] - [System Connection Setting] - [Mobile Connection Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Simple Connection Setting] | Configure functions to associate with a mobile terminal.
|
Tips
- To use Bluetooth LE, the installation of the required option and the setting by the service representative are required. For details on the required option, refer to "List of Functions with Options Required" in [User's Guide [About This Machine]].
Connecting an iOS terminal to this machine via Konica Minolta Mobile Print (mobile app) using Bluetooth LE
This section describes how to connect an iOS terminal to this machine using Konica Minolta Mobile Print installed in the iOS terminal.
Enable the Bluetooth LE terminal setting of Konica Minolta Mobile Print.
Enable the wireless connection and Bluetooth LE for iOS terminal.
Enable the Bluetooth LE function of this machine (Enabling the Bluetooth LE function of this machine).
Enable the QR code display function of this machine (Enabling the QR code display function of this machine).
Check that this machine and the iOS terminal are connected to the same wireless LAN environment.
The steps below must be executed near this machine.
1
Start the application on the iOS terminal, and display the screen that enables you to register this machine.
2
Display the list of devices compatible with Bluetooth LE communication, then select this machine.
3
Display the QR code on the screen of this machine, and read the QR code using the application.
To display the QR code, tap [Utility] - [Device Information] - [QR Code Display] on this machine.
4
Confirm that the pairing with this machine starts and that this machine is registered in the application.
Tips
- For details on how to operate the application, refer to Help of the application.
in the upper-right of a page, it turns into 
and is registered as a bookmark.