HomeSearch by PurposeConfiguring the Operating Environment for Network Fax

Search by Purpose

Configuring the Operating Environment for Network Fax

To enable the Internet fax and IP address fax functions ([Network Fax Function Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Network Fax Settings]
          • [Network Fax Function Settings]

Select whether to use IP address fax and Internet fax.

Settings

Description

[IP Address Fax Function]

Select whether to use IP address fax.

[OFF] is specified by default.

[Internet Fax Function]

Select whether to use Internet fax.

[OFF] is specified by default.

  • To use the IP Address Fax and Internet Fax functions, ask your service representative to configure settings. For details, contact your service representative.

  • To use the IP Address Fax function, the optional Fax Kit is required. bizhub C3851FS/C3851 provides the Fax Kit as standard.

To configure the operating environment for IP address fax transmission ([SMTP TX Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Network Fax Settings]
          • [SMTP TX Settings]

To use IP address fax and Internet fax, set up the operating environment of the SMTP transmission function on this machine.

Settings

Description

[Port No.]

If necessary, change the port number of the E-mail server (SMTP).

In normal circumstances, you can use the original port number.

[25] is specified by default.

[Connection Timeout]

Change the timeout period for a communication with the E-mail server (SMTP), as required.

[60 sec.] is specified by default.

To configure the operating environment for IP address fax receiving ([SMTP RX Settings])

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Network Fax Settings]
          • [SMTP RX Settings]

To use IP address fax and Internet fax, set up the operating environment of the SMTP receiving function on this machine.

Settings

Description

[ON]/[OFF]

Select whether to use the SMTP receiving function.

[OFF] is specified by default.

[Port No.]

If necessary, change the port number of the E-mail server (SMTP).

In normal circumstances, you can use the original port number.

[25] is specified by default.

[Connection Timeout]

Change the timeout period for a communication with the E-mail server (SMTP), as required.

[300] sec. is specified by default.