Network Settings

[TCP/IP Settings]

Configure the settings to use this machine in a TCP/IP environment.

[HTTP Server Settings]

Select whether to restrict the use of Web Connection, and configure your environment for IPP printing.

[FTP Settings]

Configure the FTP transmission environment and the FTP server function setting of this machine.

[SMB Settings]

Set the SMB (Server Message Block) operating environment.

[LDAP Settings]

Configure the settings to search for destinations from the LDAP server or Active Directory.

[E-mail Settings]

Configure the settings for sending and receiving E-mail with this machine.

[SNMP Settings]

Configure the settings to obtain information of this machine or to monitor the machine using Simple Network Management Protocol (SNMP).

[Bonjour Setting]

Configure the Bonjour operating environment if the machine is running under Mac OS control.

[TCP Socket Settings]

Configure the TCP Socket operating environment.

[Network Fax Settings]

Select whether to use IP address fax and Internet fax. Also, configure the SMTP transfer environment.

[WebDAV Settings]

Configure the WebDAV transmission environment and the WebDAV server function setting of this machine.

[DPWS Settings]

Configure the settings for print and scan using the Web services (such as Devices Profile for Web Services (DPWS)).

[Distributed Scan Settings]

Select whether or not to use the Distributed Scan Management on this machine.

[ThinPrint Setting]

Configure the settings to use the ThinPrint function.

ThinPrint is a function that realizes speedy printing by performing data compression or broadband control when sending a print job from ThinPrint Engine (.print Engine) to this machine used as ThinPrint Client (.print Client).

[SSDP Settings]

Select whether to use the SSDP (Simple Service Discovery Protocol) or not. To use SSDP, change the multicast TTL as necessary.

[Mopria Setting]

Specify whether to notify the Android terminal of Mopria support information for this machine when a device search request has been received from a Mopria-compatible Android terminal.

[Detail Settings]

Configure the detailed network settings.

[IEEE802.1x Authentication Setting]

Select whether to use IEEE802.1x authentication. To use IEEE802.1x authentication, check the authentication status and configure the certification verification items.

[IEEE802.1x Setting]

Configure settings to operate this machine as a supplicant (client to be authenticated) in IEEE802.1x authentication.

[Web Browser Setting]

Select whether to enable a Web Browser.

[Single Sign-On Setting]

Join the machine to the Active Directory domain and establish the single sign-on environment.

[Send Domain Limit Settings]

Restrict the domain of the recipient to transmit an E-mail, Internet fax, or IP address fax.

[Network I/F Configuration]

To add a network interface to this machine, set a network interface configuration.

[Wireless Network Setting]

Configure settings to use this machine as a wireless LAN access point or wireless LAN adapter.

[IWS Settings]

Set the operating environment of IWS (Internal Web Server) function.

[Remote Panel Settings]

Configure settings for remotely controlling the Control Panel of this machine from another computer.

[Machine Update Settings]

Configure the settings to externally download the machine firmware and configuration information and update them.

[bizhub Remote Access Setting]

Configure communication settings to connect an Android/iOS terminal to this machine using bizhub Remote Access and transfer image data or operation contents of the Control Panel.

[Network Settings List]

Print the list of network-related settings.