* Enter the name of the utility key. You can search descriptions of utility keys.

bizhub Remote Access Setting

To display: [Utility][Administrator Settings][Network Settings][bizhub Remote Access Setting]

Configure communication settings to connect an Android/iOS terminal to this machine using bizhub Remote Access and transfer image data or operation contents of the Control Panel.

Settings

Description

[ON]/[OFF]

Select whether to allow a connection from an Android/iOS terminal using bizhub Remote Access.

[OFF] is specified by default.

[Connection Method]

Compresses image data of the Control Panel of this machine before sending it to an Android/iOS terminal.

Select whether to give priority to the operation speed at an Android/iOS terminal or give priority to the image quality of the Android/iOS terminal screen when compressing images.

[Standard] is specified by default.

[Connection Timeout]

If necessary, change the timeout period to close a communication with an Android/iOS terminal.

[20] min. is specified by default.

[Operation Change Screen]

Select whether to display the screen for checking whether to continue a remote operation on the screen of an Android/iOS terminal when the Control Panel of this machine has been touched while a remote operation is being performed using an Android/iOS terminal.

[ON] is specified by default.

[Connection Permission Screen]

Select whether to display the screen for checking whether to allow a connection on the Control Panel of this machine when a remote control connection is requested from the Android/iOS terminal while you are operating the Control Panel of this machine.

[ON] is specified by default.

[Keyboard Link]

Select whether to allow text to be entered from the text entry application on the Android/iOS terminal.

You can enter characters using the keyboard, handwriting, or voice input function.

If [Allow] is selected, you can enter text using the text entry application on the Android/iOS terminal during panel operation.

To restrict the method for connecting to this machine using Keyboard Link, select [Allow only NFC.], then select the connection method to be allowed. If NFC connection is permitted, it can be established by placing the Android terminal on the Mobile Touch Area. If Bluetooth LE connection is permitted, it can be established by searching for a Bluetooth LE device using bizhub Remote Access and selecting this machine.

[Restrict] is specified by default.

[Address Link]

Select whether to allow a user to obtain the E-mail address from the address book of the Android/iOS terminal.

If [Allow] is selected, you can select an address from the address book on the Android/iOS terminal and set it as the direct-input destination in fax or scan mode.

To restrict the method for connecting to this machine using Address Link, select [Allow only NFC.], then select the connection method to be allowed. If NFC connection is permitted, it can be established by placing the Android terminal on the Mobile Touch Area. If Bluetooth LE connection is permitted, it can be established by searching for a Bluetooth LE device using bizhub Remote Access and selecting this machine.

[Restrict] is specified by default.

[Panel Link Scan]

Select whether to allow the function that sends the image scanned on this machine to the storage of the Android terminal or Google Drive.

For an iOS terminal, its storage cannot be specified as a destination. Specify the Google Drive as a destination.

[Restrict] is specified by default.

[Priority start mode]

Select which mode is used to start bizhub Remote Access by placing the Android terminal on the mobile touch area on the Control Panel.

[Panel Link] is specified by default.

Tips
  • To remote-control the Control Panel of this machine using an Android/iOS terminal, you need to install bizhub Remote Access on the Android/iOS terminal. Also, [TCP Socket] must be set to [ON] for [Administrator Settings] - [Network Settings] - [TCP Socket Settings] (default: [ON]).

  • To connect the terminal to this machine through bizhub Remote Access using NFC, configure a setting to enable NFC on this machine in advance. For details, refer to [Simple Connection Setting] .

  • To connect the terminal to this machine through bizhub Remote Access using Bluetooth LE, configure a setting to enable Bluetooth LE on this machine in advance. For details, refer to [Simple Connection Setting] .