* Enter the name of the utility key. You can search descriptions of utility keys.
Printer Adjustment
To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Printer Adjustment]
Adjust the print start position and defective print images.
Settings | Description |
|---|---|
[Leading Edge Adjustment] | Adjust the print start position at the leading edge of the paper relative to the paper discharge direction. For details, refer to [Leading Edge Adjustment] . |
[Centering] | Adjust the print start position on the left edge of the paper relative to the paper discharge direction. For details, refer to [Centering] . |
[Leading Edge Adjustment (Duplex Side 2)] | Adjust the print start position at the leading edge of the back side of the paper relative to the paper discharge direction for printing the back side in 2-sided printing. For details, refer to [Leading Edge Adjustment (Duplex Side 2)] . |
[Centering (Duplex 2nd Side)] | Adjust the print start position at the left edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing. For details, refer to [Centering (Duplex 2nd Side)] . |
[Erase Leading Edge] | Adjust leading edge erase width. For details, contact your service representative. |
[Vertical Adjustment] | Adjust the feed direction zoom ratio. For details, contact your service representative. |
[Media Adjustment] | Adjust print defects (voids, white spots, roughness) that are caused by paper properties for each paper type. For details, refer to [Media Adjustment] . |