* Enter the name of the utility key. You can search descriptions of utility keys.

Centering

To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Printer Adjustment][Centering]

Adjust the print start position on the left edge of the paper relative to the paper discharge direction.

Press the Start key to print a test pattern. Check that the margin between the left edge and the print starting position is 3/16 inch (4.2 mm) (plus or minus 1/32 inch (plus or minus 0.5 mm)). Repeat adjustments, as required.

Settings

Description

[Select Tray]

Select a paper tray that is used to adjust the start position for printing.

[Adjust Value]

Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].

The following shows the default settings.

  • Tray1: [-0.8 mm]

  • Tray2: [0.0 mm]

  • Tray3: [0.0 mm]

  • Bypass Tray: [-1.0 mm]

Tips

  • Only the plain paper of 8-1/2 by 11(A4) can be used for adjusting the Bypass Tray.