Paper Jam in Fuser Unit

CAUTION

  • The area around the fusing unit is hot. To avoid a burn injury, be careful not to touch any parts except for the specified knob and dial. In case your hand or any other part of your body comes in contact with the heated section, immediately run it under cold water and seek medical assistance.

  1. Pull the lever to open the Right Door.

    supplementary explanationWhen opening the Right Door, be sure to fold the Bypass Tray in advance.

  2. Press up the levers (2 places).

  3. Open the Fusing Cover.

  4. Carefully pull out the jammed paper.

    supplementary explanationIf you cannot remove the paper downward, remove it from the upper side of the Fuser Unit.

    NOTICE

    • If you touch the surface of the Transfer Belt Unit or Transfer Roller, it may reduce printing quality. Be careful not to touch the surface of the Transfer Belt Unit or Transfer Roller.

  5. Close the Fusing Cover.

  6. Press down the levers (2 places).

  7. Close the Right Door.