Q. Can I eliminate keying sounds on this machine?

How to set

  1. Tap [Accessibility] and select [Sound Setting].

  2. To set whether to output keying and other sounds, select [Sound Setting] and set whether to output respective sounds.

    Settings

    Description

    [All Sounds]

    Specify whether to output all sounds.

    [Confirmation Sound]

    Set whether or not to output a sound notifying that an operation takes place on the Control Panel or Touch Panel.

    [Successful Completion Sound]

    Set whether or not to output a sound notifying successful completion of an operation.

    [Completed Preparation Sound]

    Set whether or not to output a sound notifying that this machine is ready for operation.

    [Caution Sound]

    Set whether or not to output a sound notifying the need for part replacement or occurrence of an error.

  3. Tap [OK].

  4. Select items for setting the volume.

    supplementary explanationSound volume setting is disabled for items for which sound output is set to [Off] in [Sound Setting].

    Settings

    Description

    [Operation Confirmation Sound]

    [Input Confirmation Sound]

    Set the volume of sound to output when a key is pressed on the Control Panel or Touch Panel. Select the volume from [High], [Medium], and [Low].

    [Invalid Sound]

    Set the volume of sound to output when an invalid key operation takes place on the Control Panel or Touch Panel. Select the volume from [High], [Medium], and [Low].

    [Basic Sound]

    Set the volume to output when the default option is selected from a list of options where one is selected in rotation. Select the volume from [High], [Medium], and [Low].

    [Successful Completion Sound]

    [Operation Complete Sound]

    Set the volume of sound to output when an operation is completed normally. Select the volume from [High], [Medium], and [Low].

    [Transmission Complete Sound]

    Set the volume of sound output when an operation related to communications is completed normally. Select the volume from [High], [Medium], and [Low].

    [Completed Preparation Sound]

    Set the volume of sound output when this machine is ready. Select the volume from [High], [Medium], and [Low].

    [Caution Sound]

    [Low Caution Sound (Level 1)]

    Set the volume of sound output when a message is displayed on the Touch Panel indicating that the replacement time is nearing for supplies or replaceable parts. Select the volume from [High], [Medium], and [Low].

    [Low Caution Sound (Level 2)]

    Set the volume of sound output when an erroneous operation has taken place. Select the volume from [High], [Medium], and [Low].

    [Low Caution Sound (Level 3)]

    Set the volume of sound output when an error has occurred that can be addressed by referring to the message on the screen or instructions in the manual. Select the volume from [High], [Medium], and [Low].

    [Severe Caution Sound]

    Set the volume when a Toner Cartridge or Waste Toner Box installation failure or an error to be addressed by a service representative has occurred. Select the volume from [High], [Medium], and [Low].

  5. Select the volume level, then tap [OK].