Q. Can I check the finish before starting copying?

How to set: Checking the finish with a preview image

  1. Load the original.

  2. Tap [Copy].

  3. Specify copy settings and the number of copies as necessary, then press the Preview key (default: Register key 4).

  4. Tap [Preview on Screen], select the original loading direction, then tap [Start].

  5. Check the preview display, and rotate the page or change settings as required.

    supplementary explanationTo continue scanning originals, load the original, then tap [Start Scan].

    supplementary explanationTo start copying, tap [Print] or press the Start key.

    supplementary explanationTo enlarge the preview image, double-tap the image.

    supplementary explanationTo enlarge or reduce the preview image, pinch-in or pinch-out the image.

    supplementary explanationTo rotate the image 180 degrees, rotate the preview image.

    supplementary explanationIf a multi-page original has been scanned, you can flick the preview image to feed pages forward or backward.

    supplementary explanationIf you tap the tab key on the right of the screen, you can display or hide the setting key. The setting key allows you to enlarge or rotate a page.

  6. Tap [Print] to start copying the original.

How to set: Checking the finish by outputting one copy

  1. Load the original.

  2. Tap [Copy].

  3. Specify copy settings and the number of copies as necessary, then press the Preview key (default: Register key 4).

  4. Tap [Print], select the original loading direction, then tap [Start].

    One copy is output.

  5. Check the finishing of the copy.

  6. If the finishing is acceptable, press the Start key.