Copying Various Types of Originals

Copying the front and back sides of a card on the same side of a single sheet ([Card Shot])

When you want to copy cards, such as an insurance card, a driver license card and a business card, you can arrange the front and back sides of the card on a single page and print the images on to the same side of one sheet. This can reduce the number of sheets used.

  1. Place a card on the Original Glass.

    supplementary explanationPlace the top side of the card at the back, and align the card to the left back of the Original Scale.

  2. Tap [Paper], and specify the paper tray for printing the card.

    supplementary explanationIf you specify [Card Shot], you must specify a paper tray other than [Auto].

  3. Select [Application] - [Other] to set [Card Shot] to [ON], and configure the [Original Size], [Layout], and [Zoom] settings according to the finishing image.

    supplementary explanationFor details, refer to [Card Shot] .

  4. Press the Start key.

    The front side of the card is scanned.

  5. Turn the card over, and place it on the Original Glass.

    supplementary explanationPlace the card at the same position that is shown in Step 1.

  6. Press the Start key.

    The back side of the card is scanned.

  7. After both sides of the card are scanned, tap [Finish] and the Start key.

    Copying begins.

Splitting the left and right pages of a book and catalog ([Book Original])

You can copy two-page spreads such as books and catalogs separately into the left and right pages, or copy on a single sheet as one page. Place a book or catalog on the Original Glass; you do not need to close the ADF to scan it.

For details, refer to [Book Original] .

Splitting the left and right pages of two-page spreads ([Page Separation])

Copy two-page spreads, such as a catalog with the staples removed, separately into the left and right pages.

You can copy a two-page spread separately into two pages with single operation, with no need of scanning each page separately. Place the two-page spread in the ADF.

For details, refer to [Page Separation] .