Original/paper setting
Configuring the setting to scan the original from the ADF
Specify the original skew adjustment level of the original when scanning it on the ADF.
Select [System Settings] - [ADF original skew adj.setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Skew adj. level] | Select the original skew adjustment level of the original when scanning it on the ADF (default: [High]).
|
Setting the manual staple operation
Set the manual staple operation.
Select [System Settings] - [Manual staple setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Staple start wait time] | Specify the waiting time from the time when paper is loaded into the manual staple slit to the time when stapling is started (default: [1] sec.). |
[Setting for Manual Staple] | When not changing to the sleep mode to always make the manual staple available, select [Disable sleep mode] (default: [OFF]). |
Tips
This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .
Specifying whether to automatically detect the paper type for each tray
Select [System Settings] - [Paper type auto detection settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and specify whether to automatically detect the paper type for each tray (default: ON).
Setting to ON allows you to select [Auto] when specifying the paper type of the tray.
Tips- This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .