Sending (Basic Operation Flow)
Load the original.
When loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.
Tap [Internet Fax] on the home screen.
Specify the destination.
For details on how to specify a destination, refer to Here.
Specify transmission options as needed.
Specify the size of the target original in [Scan Size] (default: [8-1/2 11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off.
For details on option settings, refer to Here.
Use the Start key to start transmission.
Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.
When an Internet fax is sent, a TX result report is printed on this machine. With the TX result report, you can check for successful fax transmission.
When the destination machine receives an Internet fax, an MDN message is printed on this machine. With the MDN Message, you can check that the destination machine receives the fax normally.
