Fully Using Print Functions
Settings Anyone can Change
- To select the optimum color setting mode for the original ([Color Setting])
- To intensify small or faint letters, or to sharpen the edges of images such as text in a table or graphics to improve legibility ([Edge Enhancement])
- To print images with a glossy finish ([Gross Mode])
- To reduce the printing density in order to save toner consumption ([Toner Save])
- To specify whether to save the next print job on the hard disk when the job is received while another print job is active ([Spool Print Jobs in HDD before RIP])
- To specify whether to use paper of a size close to the size specified in Paper Size if the specified paper is not loaded in the paper tray ([A4/A3<-->LTR/LGR Auto Switch])
- To print a banner page that contains the sender or title of print data ([Banner Sheet Setting])
- To specify how to adjust the line width ([Line Width Adjustment])
- To prevent the line width from looking largish in the gray background ([Gray Background Text Correction])
- To slightly reduce the entire page when directly printing a PDF, PPML, or OOXML file ([Minimal Print])
- To select whether to give priority to the printing quality or printing speed when directly printing an OOXML file ([OOXML Print Mode])
- To fold paper ([Fold Type Settings])
- To specify the unit of paper to be folded at one time when using Half-Fold or Tri-Fold ([Half-Fold/Tri-Fold Specification Settings])
- To specify whether to verify the digital signature when directly printing an XPS or OOXML file ([Verify XPS/OOXML Digital Signature])
- To change the default OOXML print settings for direct printing ([OOXML Print Settings])
- To change the default combination settings for direct printing ([Layout - Combination])
- To print a report on configuration information of this machine or a font list ([Print Reports])
- To change the method for determining the paper size when directly printing TIFF, JPEG, or PDF files ([TIFF Image Paper Setting])
- To allow banner printing through a computer ([Banner Printing])
Settings only the Administrators can Change
- To change the timing to start printing at reception of print data ([Print/Fax Output Settings])
- To change the communication timeout time at USB connection ([USB Timeout])
- To change the communication timeout time at network connection ([Network Timeout])
- To specify whether to print error information when an error has occurred while printing an XPS or OOXML file ([Print XPS/OOXML Errors])
- To restrict acquiring device information from the Windows printer driver using a password ([Assign Account to Acquire Device Info])
- To allow only print jobs using the Secure Print function ([Secure Print Only])
- To change an encryption passphrase for encrypting an authentication password ([Driver Password Encryption Setting])
- To specify operations required when receiving 1200 dpi print data ([Operation when 1200 dpi file is received])