* Enter the name of the utility key. You can search descriptions of utility keys.
Prefix/Suffix Automatic Setting
To display: [Utility][Administrator Settings][System Connection][Prefix/Suffix Automatic Setting]
When using a fax server that communicates in the E-mail format, select whether to automatically add a prefix and a suffix to the destination number.
[OFF] is specified by default.
The setting in Registration No. 01 ([Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Prefix/Suffix Setting] - [Prefix/Suffix Registration]) is applied.
If Prefix/Suffix Automatic Setting is set to [ON], the other settings will be restricted.
[Utility] - [Administrator Settings] - [Fax Settings] are not available (excluding [Destination Check Display Function], [PC-FAX Permission Setting], [Confirm Address (TX)], [Confirm Address (Register)], and [PIN Code Display Mask Function]).
In Web Connection, setting is disabled for [Store Address] - [Application Registration].
Bulletin Board User Box, Polling TX User Box, Memory RX User Box, and Re-Transmission User Box are not available.
Bulletin Board User Box and Relay User Box cannot be registered.
Confidential RX is not available.
The Off-Hook key is not available.
You cannot configure [Fax Header Settings], [Line Setting], [Quick Memory TX], [Polling TX], [Polling RX], [Timer TX], [Password TX], and [F-Code TX] in the Scan/Fax mode.
The network fax function is not available.
[Outside], [Tone], [Pause], [-], and [Line Settings] are not available when registering a fax destination in the address book.
You cannot output a report by selecting [Job List] - [Comm. List].
A number excluding a prefix and suffix is displayed in [Address] of [Job History].
[Report Type] in [Comm. List] defaults to [Scan].
[Address Type] that appears when you select [Comm. List] - [Log] - [Details] defaults to [E-mail].
[Meter Count] is updated only when [Scans] is enabled in [Scan/Fax]; however, [Fax TX] is not updated.
The fax mode is not available.