* Enter the name of the utility key. You can search descriptions of utility keys.

Time Adjustment Setting

To display: [Utility][Administrator Settings][Network Settings][Detail Settings][Time Adjustment Setting]

Configure settings to automatically adjust the date and time of this machine using the NTP (Network Time Protocol) server.

Settings

Description

[ON]/[OFF]

Select whether to automatically adjust the date and time of this machine via the NTP server.

[OFF] is specified by default.

[Auto IPv6 Retrieval]

In the IPv6 environment, select whether to automatically specify the NTP server address by DHCPv6.

[ON] is specified by default.

[NTP Server Setting]

Register a discovery proxy server to perform Web service printing or scanning.

Select a number to be registered, and configure the following items.

[Host Address]

Enter the NTP server address.

Use one of the following formats.

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16"

[Port Number]

If necessary, change the NTP server port number.

In normal circumstances, you can use the original port number.

[123] is specified by default.

[Set Date]

Connect to the NTP server, and adjust the date and time.

[Auto Time Adjustment]

Select whether to automatically adjust the date and time by connecting to the NTP server at periodical intervals.

[OFF] is specified by default.

[Polling Interval]

If you select [On] for [Auto Time Adjustment], specify an interval to automatically adjust the date and time.

[24 hours] is specified by default.