* Enter the name of the utility key. You can search descriptions of utility keys.
Punch Horizontal Position Adjustment
To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Finisher Adjustment][Punch Horizontal Position Adjustment]
If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions.
Copy after configuration, then repeat adjustments as required.
This adjustment is possible when the Finisher FS-534 and Punch Kit PK-520 are installed.
Settings | Description |
---|---|
[Paper Type] | Select the type of paper subject to punch hole position adjustment. |
[Adjust Value] | Enter an adjustment value between -10 and 10 by tapping [-] and [+].
[0] is specified by default. |
Make adjustment while checking a sheet of paper having punched holes that are not in the correct positions.