New

[No.]

Destination registration number. [No.] is automatically registered using an unused smaller number. If you want to specify a number, tap [No.], then enter the number.

[Name]

Enter the destination name to be displayed on the Touch Panel (using up to 24 characters).

Assign a name that helps you easily identify the destination.

[Sort Character]

Enter the same name as the registered (using up to 24 characters).

You can sort destinations by registration name.

[Index]

Select a corresponding character so that the destination can be index-searched by registration name.

• For a frequently used destination, also select [Favorites]. If [Favorites] is selected, the destination will appear in the main screen of the fax/scan mode, enabling the user to easily select a destination.

[Destination]

Enter the destination IP address or host name.

• Example of IP address (IPv4) entry: "192.168.1.1"

• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

• Example of host name entry: "host.example.com" (Also enter a domain name.)

You can also specify a destination by E-mail address. To specify a destination by E-mail address, enter the destination IP address or host name following "ipaddrfax@".

To enter an IP address following the @ symbol, put the IP address in brackets "[ ]".

• Example of IP address (IPv4) entry: "ipaddrfax@[192.168.1.1]"

To enter an IP address (IPv6), enter "IPv6:" following left bracket "[ ".

• Example of IP address (IPv6) entry: "ipaddrfax@[IPv6:fe80::220:6bff:fe10:2f16]"

To enter a host name following the @ symbol, brackets "[ ]" are unnecessary.

• Example of host name entry: "ipaddrfax@host.example.com"

[Port Number]

If necessary, change the port number.

In normal circumstances, you can use the original port number.

[25] is specified by default.

[Destination Machine Type]

Select whether the recipient machine supports color print.

[Monochrome] is specified by default.