* Enter the name of the utility key. You can search descriptions of utility keys.

New

To display: [Utility][One-Touch/User Box Registration][Create One-Touch Destination][Address Book (Public)][FTP][New]

Register destination FTP server host names or IP addresses.

Settings

Description

[No.]

Destination registration number. [No.] is automatically registered using an unused smaller number. If you want to specify a number, tap [No.], then enter the number.

[Name]

Enter the destination name to be displayed on the Touch Panel (using up to 24 characters).

Assign a name that helps you easily identify the destination.

[Sort Character]

Enter the same name as the registered (using up to 24 characters).

You can sort destinations by registration name.

[Index]

Select a corresponding character so that the destination can be index-searched by registration name.

  • For a frequently used destination, also select [Favorites]. If [Favorites] is selected, the destination will appear in the main screen of the fax/scan mode, enabling the user to easily select a destination.

[Host Address]

Enter the host name or IP address of the destination FTP server (using up to 253 bytes).

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[File Path]

Enter the name of a destination folder in the FTP server specified in [Host Address] with up to 127 bytes.

  • Entry example: "scan"

When specifying a folder in the FTP folder, insert a symbol, "/", between the folder names.

  • Entry example: "scan/document"

When not specifying a file path, enter only "/".

  • Entry example: "/"

[User ID]

If authentication is required in the destination FTP server, enter the available user name to log in (using up to 64 characters).

[Password]

Enter the password of the user specified in [User ID].

[anonymous]

When authentication is not required in the destination FTP server, tap [ON].

[OFF] is specified by default.

[PASV]

When the PASV mode is used in your environment, tap [ON].

[OFF] is specified by default.

[Proxy]

When a proxy server is used in your environment, tap [ON].

[OFF] is specified by default.

[Port Number]

If necessary, change the port number.

In normal circumstances, you can use the original port number.

[21] is specified by default.

Tips

  • To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].

  • To change the settings for a registered destination, select its registered name, then tap [Edit].

  • To delete a registered destination, select its registered name, then tap [Delete].