* Enter the name of the utility key. You can search descriptions of utility keys.
New
To display: [Utility][One-Touch/User Box Registration][Create One-Touch Destination][Address Book (Public)][PC (SMB)][New]
Register destination computer names (host name) or IP addresses.
Settings | Description |
---|---|
[No.] | Destination registration number. [No.] is automatically registered using an unused smaller number. If you want to specify a number, tap [No.], then enter the number. |
[Name] | Enter the destination name to be displayed on the Touch Panel (using up to 24 characters). Assign a name that helps you easily identify the destination. |
[Sort Character] | Enter the same name as the registered (using up to 24 characters). You can sort destinations by registration name. |
[Index] | Select a corresponding character so that the destination can be index-searched by registration name.
|
[User ID] | Enter the name of a user who is authorized to access the folder specified in [File Path] (using up to 64 characters).
|
[Password] | Enter the password of the user specified in [User ID]. |
[Host Address] | Enters the destination PC name (host name) or IP address (up to 253 bytes long).
|
[Check Connection] | Check whether or not the host name you entered in [Host Address] exists. |
[File Path] | Enter the shared folder name of the computer specified in [Host Address] with up to 255 bytes. The shared folder name is generally referred to as a share name.
When specifying a folder in the shared folder, insert a symbol, "\", between folder names.
|
[Host Name Search] | Searches for the host name to be applied to [Host Address]. To search for the host name, specify a group name.
|
[Reference] | On the Touch Panel, search for a computer to send a file to, and select a target shared folder. When the authentication screen appears, enter the name and password of a user who has privileges to access the selected folder. After authentication, [Host Address] or [File Path] is entered automatically. The Reference function may fail under the following conditions.
|
To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].
To change the settings for a registered destination, select its registered name, then tap [Edit].
To delete a registered destination, select its registered name, then tap [Delete].