Paper Jam in Paper Tray
Tips
The figure shows the Paper Feed Cabinet PC-214 installed.
When removing pieces of paper in the paper tray (Tray 1/2):
Pull out the paper tray, then remove any unnecessary pieces of paper.
When removing pieces of paper in the paper tray (Tray 3/4):
Take out the paper tray (Tray 1/2) and pull out the paper tray (Tray 3/4), then remove pieces of paper.
When removing pieces of paper in the paper tray (Tray 3/4) (with optional Heater HT-509 installed)
Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.
When removing pieces of paper in the LCT (Built-in):
Take out the paper tray (Tray 1/2) and pull out the paper tray of the LCT (built-in), then remove pieces of paper.
When removing pieces of paper in the LCT (built-in) (with optional Heater HT-509 installed)
Release the lock as shown in the figure, pull out the paper tray, then remove any unnecessary pieces of paper.
NOTICE- Be careful not to touch the surface of the Transport Roller with your hand.
CAUTION- The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.