When a Message Appears to Replace Consumables or Carry Out Cleaning
- When staples in the Finisher have run out
- When the punch scrap box is full
- When toner is running out in the Toner Cartridge
- When it is time to replace a Toner Cartridge
- When it is time to replace a Drum Unit
- When it is time to replace a Developing Unit
- When it is time to replace an Imaging Unit
- When the Waste Toner Box is full
When staples in the Finisher have run out
When staples in the Finisher have run out, a message appears to prompt you to make replenish them.
Take action while referring to the label inside the machine.
For details on the replacement procedure when using the Finisher FS-534, refer to [Finisher FS-534] .
For details on the replacement procedure when using the Saddle Stitcher SD-511, refer to [Saddle Stitcher SD-511] .
For details on the replacement procedure when using the Finisher FS-533, refer to [Finisher FS-533] .
When the punch scrap box is full
When the punch scrap box is full, a message appears to prompt you to dispose of the punch scraps (at replacement by user).
Take action while referring to the label inside the machine.
For details on the handling procedure when using the Finisher FS-534, refer to [Finisher FS-534] .
For details on the handling procedure when using the Finisher FS-533, refer to [Finisher FS-533] .
When toner is running out in the Toner Cartridge
When it is almost time to replace a Toner Cartridge, an advanced warning message appears. Prepare a replacement Toner Cartridge based on the maintenance contract.
When it is time to replace a Toner Cartridge
When it is time to replace a Toner Cartridge, a replacement prompt message appears. Replace it based on the maintenance contract. Tap [Start Guidance] to display the replacement procedure on the screen and check it.
For details on the replacement procedure, refer to [Replacing a Toner Cartridge] .
Do not replace a Toner Cartridge of a color that is not displayed.
When it is time to replace a Toner Cartridge of a color other than black, printing can be forcibly continued using black. Tap [Continue], and then select a desired print job.
When it is time to replace a Drum Unit
When it is time to replace a Drum Unit, a replacement prompt message appears. Replace it based on the maintenance contract. Tap [Start Guidance] to display the replacement procedure on the screen and check it.
A Drum Unit must not be replaced before the relevant message appears.
For details on the replacement procedure, refer to [Replacing a Drum Unit] .
By the factory default status, this message is displayed only in some area.
The settings by the service representative are required to display a message about Drum Unit. For details, contact your service representative.
When it is time to replace a Developing Unit
When it is time to replace a Developing Unit, a message appears to prompt you to contact your service representative. If the message appears, contact your service representative.
By the factory default status, this message is displayed only in some area.
The settings by the service representative are required to display a message about Developing Unit. For details, contact your service representative.
When it is time to replace an Imaging Unit
When it is time to replace an Imaging Unit, a message appears to prompt you to contact your service representative. If the message appears, contact your service representative.
By the factory default status, this message is displayed only in some area.
The settings by the service representative are required to display a message about Imaging Unit. For details, contact your service representative.
When it is time to replace an Imaging Unit, printing can be forcibly continued using black. Tap [Continue], and then select a desired print job.
When the Waste Toner Box is full
When the Waste Toner Box is full, a message appears to prompt you to replace it (at replacement by user). Tap [Start Guidance], then follow the displayed guidance to take an action.
For details on the replacement procedure, refer to [Replacing a Waste Toner Box] .