Operations required to use this function (for the administrator)
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this machine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.
Tips
If no IP address is displayed, you need to set up the network. For details, refer to [Configuring network environment settings] .
Enabling the Keyboard Link function
On this machine, permit a connection from an Android/iOS terminal using Remote Access, and enable the Keyboard Link function.
How to configure the setting is explained using Web Connection. For details, refer to [Using an Android/iOS terminal for operations] .
Configuring a setting to associate this machine with an Android terminal
It is advisable to use the NFC function of this machine when connecting an Android terminal to this machine using Remote Access. Using the NFC function of this machine allows you to easily connect an Android terminal to this machine using Remote Access by simply placing the Android terminal on the mobile touch area on the Control Panel of this machine.
Configure a setting to support NFC on this machine. Also, for this machine, set network information required to connect an Android terminal to this machine.
How to configure the setting is explained using Web Connection. For details, refer to [Setting network information of this machine via NFC] .
Configuring a setting to associate this machine with an iOS terminal
It is advisable to use the Bluetooth LE function of this machine when connecting an iOS terminal to this machine using Remote Access. Using the Bluetooth LE function of this machine allows a user to easily establish a connection with this machine by moving the iOS terminal closer to this machine and operating Remote Access.
Configure a setting to support Bluetooth LE on this machine. Also, for this machine, set network information required to connect an iOS terminal to this machine.
How to configure the setting is explained using Web Connection. For details, refer to [Enabling the Bluetooth LE function on this machine] .
Tips- The optional Local Interface Kit (voice guidance / Bluetooth LE compatible) is required to use this function. This setting must be configured in advance by your service representative. For details, contact your service representative.