Main messages and remedies

[Failed to send the Print job(s).]

The system could not check the communication status to the primary and secondary destinations specified in LK-114_ManagerPort.

User: If [OK] is clicked, the print job is deleted automatically.

Check the communication of the destination, then execute the print job again.

A sending error has occurred during data transmission.

User: If [OK] is clicked, the print job is left in the spooler as an error.

Check the communication of the destination, then execute the print job again.

[Problem detected in the Client machine. Turn the main power OFF and then ON again to resolve the error. If the trouble code appears again, please contact the Administrator.]

A fatal error has occurred on a client machine.

User: Restart the client machine.

Administrator: Check the settings of the client function using LK-114_SetupTool or the Control Panel of the MFP.

[Printer RX Port cannot be used. Please Contact the Administrator.]

The MFP port is not available.

Administrator: Check port settings in LK-114-ManegerPort.

[Problem detected in Store Print Documents. Turn the main power OFF and then ON again to resolve the error. If the trouble code appears again, please contact the Administrator.]

A fatal error has occurred in a storage machine.

User: Restart the storage machine.

Administrator: Check the settings of the storage function using LK-114_SetupTool or the Control Panel of the MFP.

[Store Print Documents is invalid.]

The storage machine setting is disabled.

Administrator: Enable the storage function setting using LK-114_SetupTool or the Control Panel of the MFP.

[TX Timeout has occurred.]

Processing has timed out.

Administrator: Change the timeout value specified for the storage function in LK-114_SetupTool or on the Control Panel of the MFP.

[Incorrect Serverless Pull Printing Group setting. Please contact the Administrator.]

A client machine is not registered in the serverless pull printing group settings registered in the storage machine.

Administrator: Register the MFP in the same serverless pull printing group as for the storage machine using LK-114_SetupTool or the Control Panel of the MFP.

[In progress. Please try again after sometime.]

Operation is not possible because the MFP is processing.

User: Rerun the job.

[Store Print Documents is starting. Please try again later.]

Operation is not possible because the storage machine is active.

User: After the storage machine has started, rerun the job.

[The number of documents is nearing the max. limit. Please contact the Administrator.]

Seventy percent or more of the maximum (10,000 documents) are registered.

Administrator: Delete unnecessary print jobs on the document list window.

[In Store Print Documents, the HDD Spool Storage space is nearing the max. limit. Please contact the Administrator.]

Seventy percent or more of documents are registered in the 5GB HDD.

Administrator: Delete unnecessary print jobs on the document list window.

[The number of Files is nearing the max. Spool Limit. Delete the files.]

Seventy percent or more of the maximum (100 documents) are registered by users who have logged in.

User: Delete unnecessary print jobs on the document list window.

[Some Documents could not be processed. Please try again later.]

Failed to complete the processing operation because the target document is currently being used in a storage device.

User: Rerun the job.