Configuring Settings on the Control Panel of the MFP

Configuring the storage function

Configure the storage function using the Control Panel of the MFP. If the storage function is enabled, you can store print jobs sent from a computer on the storage machine.

Tap [Utility] - [Administrator Settings] - [System Connection] - [Serverless Pull Printing Settings] - [Store Print Documents Settings], then configure the following settings.

Settings

Description

[Store Print Documents Usage Settings]

Select whether to use the storage function.

To use the storage function, select [Enable]. To apply setting changes, restart the MFP.

If a setting is changed as shown below, [Store Print Documents Usage Settings] is forcibly set to [No Limit].

  • The authentication method has been canceled or changed to another one.

  • [Enhanced Security Mode] has been changed to enable.

If [Store Print Documents Usage Settings] is changed from [Enable] to [No Limit], all print jobs stored on the storage machine are deleted.

[Delete after Print Setting]

Select whether to automatically delete print jobs stored on the storage machine each time they are executed.

This option is available when [Store Print Documents Usage Settings] is set to [Enable].

[Document Delete Time Setting]

Specify the time to automatically delete print jobs stored on the storage machine.

This option is available when [Store Print Documents Usage Settings] is set to [Enable].

  • When specifying the time in units of days, select [1 day], [2 days], [3 days], [7 days], or [30 days].

  • When specifying the time in hours, select [Time], then enter the hour value.

  • To keep print jobs on the storage machine, select [Save].

[Delete All Documents]

Deletes all print jobs stored on the storage machine.

This option is available when [Store Print Documents Usage Settings] is set to [Enable].

Tips

  • If serverless pull printing settings are configured using LK-114_SetupTool, this setting is not required.

  • If print jobs are executed on the client machine during a period of heavy network traffic, print jobs may not be deleted even when [Delete After Print Settings] is set to [ON]. In such a case, extend the timeout period in [Client Function Setting] - [Connection Timeout Setting].

Configuring the client function

Configure the client function using the Control Panel of the MFP. Enabling the client function allows you to execute print jobs stored on the storage machine through the MFP with the client function enabled.

Tap [Utility] - [Administrator Settings] - [System Connection] - [Serverless Pull Printing Settings] - [Client Function Setting], then configure the following settings.

Item

Specifications

[Client Function Usage Settings]

Select whether to use the client function.

To use the client function, select [Enable].

[Protocol Setting]

Select [IPP] or [Raw port] as the protocol used to connect to the storage device.

This option is available when [Client Function Usage Settings] is set to [Enable].

[Connection Timeout Setting]

Specify the timeout to connect to the storage device.

This option is available when [Client Function Usage Settings] is set to [Enable].

Tips

  • If serverless pull printing settings are configured using LK-114_SetupTool, this setting is not required.

  • When the client machine uses IPP as the protocol while IPP authentication is enabled, you need to set the user name and password for authentication to all the client and storage machines that compose the target serverless pull printing group. For details on the setting procedure, refer to [IPP Authentication Settings] .