Registering a proxy server used for remote diagnosis

To use a proxy server for using a service that diagnoses the machine status remotely, register the proxy server information with this machine.

A proxy server used for WebDAV transmission can also be used as a proxy server for remote diagnosis. You can also a different proxy server.

In the administrator mode, select [Network] - [WebDAV Settings] - [Proxy Setting for Remote Access], then configure the following settings.

Settings

Description

[Proxy Setting for Remote Access]

Select [ON] to use a proxy server for remote diagnosis.

[OFF] is specified by default.

[Proxy Settings]

Configure the proxy server used for remote diagnosis

[Synchronize WebDAV Client Setting]

Select whether to use the proxy server used for WebDAV transmission as a proxy server for remote diagnosis.

To use a different proxy server for remote diagnosis, select [OFF] and enter the proxy server information.

[ON] is specified by default.

[Proxy Server Address]

Enter the proxy server address.

Use one of the following formats.

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Proxy Server Port Number]

If necessary, enter the proxy server port number.

[User Name]

Enter the user name to log in to the proxy server (using up to 63 characters).

[Password]

Enter the password of the user name you entered into [User Name] (using up to 63 characters).

To enter (change) the password, select the [Password is changed.] check box, then enter a new password.