Machine Side: Steps Required to Use This Function (for the Administrator)
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this machine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.
Reference
If no IP address is displayed, you need to set up the network. For details, refer to [Configuring network environment settings] .
Checking the environment to use the TWAIN scan function
Check that the appropriate settings are configured to use this machine as a scanner. (You can use this function with the default settings unless otherwise requested.)
How to configure the setting is explained using Web Connection. For details, refer to [Configuring the TWAIN scan environment] .