Enlarge display settings
Changing default settings for Normal Display and Enlarge Display collectively
Configure settings to simultaneously change the default values for Normal screen display and Enlarge display at the same time.
Select [System Settings] - [Reset Settings] - [Job Reset] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Default Basic/Enlarge Display Common Setting] | When simultaneously specifying the default values of the normal screen display and enlarged display, set this option to ON (default: OFF). If ON is selected, [Default Enlarge Display Settings] is not displayed. Initial values for each mode that are changed in [Default Copy Settings] or [Default Scan/Fax Settings] are applied to both Normal and Enlarge Display modes. |
Setting the action for switching the display to Enlarge Display
Select whether to change the default display of the classic style to the enlarge display mode. Also, set the operation to be taken when the normal screen display is switched to the enlarge display mode.
Select [System Settings] - [Enlarge Display Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Default Enlarge Display Setting] | When changing the default display of the classic style to the enlarge display mode, set this option to ON (default: OFF). |
[Enlarge Display Setting] | If [Default Enlarge Display Setting] is set to ON, specify whether to switch to the enlarge display mode when the normal screen display is reset (default: [Normal]). |
[Apply Basic Setting to Enlarge Display] | Select whether to inherit the settings configured on the normal screen display when switching the screen from Normal to Enlarge Display (default: [Mode 2]).
|
[Mode 1]: Inherit all normal mode settings.