Original/paper setting

Configuring the setting to scan the original from the ADF

Specify the original skew adjustment level of the original when scanning it on the ADF.

Select [System Settings] - [ADF original skew adj.setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

Setting

Description

[Skew adj. level]

Select the original skew adjustment level of the original when scanning it on the ADF (default: [High]).

  • [High]: Adjusts the skew mechanically and electronically.

  • [Low]: Adjusts the skew mechanically.

Setting the manual staple operation

Set the manual staple operation.

Select [System Settings] - [Manual staple setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

Setting

Description

[Staple start wait time]

Specify the waiting time from the time when paper is loaded into the manual staple slit to the time when stapling is started (default: [1] sec.).

[Setting for Manual Staple]

When not changing to the sleep mode to always make the manual staple available, select [Disable sleep mode] (default: [OFF]).

Tips

  • This setting is displayed when the optional Finisher FS-539 or Finisher FS-539 SD is installed in this machine.