Available Operations in the [Configure] Tab

[Device Option]

The model name, options installed on this machine, and authentication settings of this machine are displayed.

When the settings of this machine cannot be obtained, you need to manually change the settings. Select an item to change from the list, and set a value in the [Setting].

[Paper Tray Information]

The paper types assigned to the paper trays of this machine are displayed.

When the settings of this machine cannot be obtained, you need to manually change the settings. In [Paper Tray Settings...], change the paper type assignment.

[Set Paper Name by User...]

Register the user paper name used in the printer driver. Set a paper name and a paper type as the custom paper name.

[Obtain Device Information]

The PC communicates with this machine and obtains the optional device installation information.

In [Obtain Settings...], set the method of obtaining the information on this machine.

[Obtain Settings...]

Configure the settings to obtain the information of this machine.

[Auto]

Select this check box to automatically obtain the information of this machine.

[Destination Settings]

Set the communication method to use to obtain information from this machine.

• [Device which Connect with Printer Port]: Information is obtained from the printing port specified in the [Port] tab in the driver.

• [Specify IP Address or Printer Name]: Information is obtained by connecting to a device with the entered IP address or printer name.

[SNMP Settings]

Configure SNMP v1/v2c and SNMP v3 communication settings.

• [UDP Port Number]: Change the UDP port number as needed.

• [SNMP Version]: Select the required SNMP version.

• [SNMP v1/v2c Setting]: Configure SNMP v1 or v2c settings.
  [Read Community Name]: Enter a read-only community name.

• [SNMP v3 Setting]: Configure SNMP v3 settings.
  [Discovery User Name]: Enter the user name for detection.
  [Read User Name]: Enter the read-only user name.
  [Context Name]: Enter the SNMP context name.
  [Security Level]: Select a security level for the read-only user.
  [Authentication Algorithm]: Select an authentication algorithm.
  [Read auth]: Enter the authentication password of the read-only user.
  [Encryption Algorithm]: Select an encryption algorithm.
  [Read priv]: Enter the password for privacy (encryption) of the read-only user.

[Enter Password to acquire Device Information]

Enter the password for user authentication if the device information is password-protected against access through the driver by setting [Assign Account to Acquire Device Info] ( [Assign Account to Acquire Device Info] ) on this machine.

[Use proxy server]

Specify whether to conduct printing and communications using the proxy server set to the computer.

[Encryption Passphrase]

Select this check box when you want to set your own encryption passphrase.

The encryption passphrase is used for encrypting the authentication password that is sent to this machine for executing printing. In normal circumstances, the authentication password is encrypted using the encryption passphrase registered in advance in this machine. However, you can change the encryption passphrase if necessary.

To change the encryption passphrase, change the settings of this machine, then enter the preset encryption passphrase for the driver. For details on how to change the encryption passphrase, refer to [Changing the Encryption Passphrase] .

[Software Tools]

You can start up the software tools such as Web Connection.