Configuring the TWAIN scan environment

Setting flow

Using the TWAIN driver enables you to use this machine as a scanner by controlling it from a computer connected to the network.

When using the TWAIN scan, follow the below procedure to configure the settings.

1. Configuring network settings of this machine (Here)

2. Configuring basic settings for TWAIN Scan (Here)

3. Configuring settings to suit your environment

   • Changing the operation lock time (Here)

Configuring the basic settings for the TWAIN scan

Configure the settings to use the TWAIN Scan function.

1. Select [Network] - [SNMP Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

   Setting	Description
   [SNMP]	When using the TWAIN scan function, set this option to ON (default: ON). Select the check box of the SNMP version you use.
   [UDP Port Setting]	If necessary, change the UDP port number (default: [161]).

2. Select [Network] - [TCP Socket Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

   Setting	Description
   [TCP Socket]	When using the TWAIN scan function, set this option to ON (default: ON).
   [Port No.]	If necessary, change the TCP Socket port number (default: [59158]).