Registering a WebDAV program

A program can be registered or edited using Web Connection. Although character input is a difficult process using the Touch Panel, it can be carried out easily if you use the computer.

A combination of address information and the scan/fax transmission option settings can be registered in a program.

The following describes the WebDAV program.

Select [Store Address] - [Program] - [Registration] in user mode or administrator mode of Web Connection. In [Search from Function], select [WebDAV], and configure the following settings.

Setting

Description

[Name]

Enter the name of the program (using up to 24 characters).

[Destination Information]

Click [Search from List], and select a destination WebDAV from the list. Click [Check Destination] to check registered address books.

If you wish to manually enter a destination WebDAV, select [Direct Input] and enter the WebDAV.

  • [Host Address]: Enter the destination host name or IP address (using up to 253 bytes).

  • [File Path]: Enter the folder name of the host specified in [Host Address] (using up to 255 bytes).

  • [User ID]: Enter the name of a user with folder access rights (using up to 64 characters).

  • [Password]: Enter the password (using up to 64 characters, excluding ") to access the folder.

  • [SSL Settings]: When SSL is used in your environment, set this option to ON (default: OFF). Setting this option to ON changes [Port No.] to [443].

  • [Proxy]: When a proxy server is used in your environment, set this option to ON (default: OFF).

  • [Port No.]: If necessary, change the port number (default: [80]).

Only one destination can be specified.

[Basic Setting]/[Application Setting]

Configure the Scan option settings.

For details, refer to [Configuring the scan/fax transmission option settings] .

[Limiting Access to Destinations]

Limit access to this destination, if necessary.

For details, refer to [Limiting the accessible destinations] .