Line Parameter Setting

[Dialing Method]

Select the line type according to your environment.

For details, refer to [Dialing Method] .

[Receive Mode]

Select a receive mode.

For details, refer to [Receive Mode] .

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax.

For details, refer to [Number of RX Call Rings] .

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after a certain period of time has elapsed. If necessary, change the number of redials.

For details, refer to [Number of Redials] .

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials].

For details, refer to [Redial Interval] .

[Line Monitor Sound]

Select whether to monitor sounds on the telephone line during fax communication.

For details, refer to [Line Monitor Sound] .

[Line Monitor Sound Volume (Send)]

Monitors sounds output from the machine. Specify the monitor sound volume between 0 and 8.

For details, refer to [Line Monitor Sound Volume (Send)] .

[Line Monitor Sound Volume (Receive)]

Monitors sounds output from the recipient, including switching equipment or TA. Specify the monitor sound volume between 0 and 8.

For details, refer to [Line Monitor Sound Volume (Receive)] .

[Manual RX V34 Settings]

Select whether to cancel the V.34 function when manually receiving a fax.

For details, refer to [Manual RX V34 Settings] .

[Ring Detection Pattern]

Select a fax ring pattern when the DRPD (Distinctive Ring Pattern Detection) service is used.

For details, refer to [Ring Detection Pattern] .