* Enter the name of the utility key. You can search descriptions of utility keys.

IEEE802.1x Setting

To display: [Utility][Administrator Settings][Network Settings][IEEE802.1x Setting]

Configure settings to operate this machine as a supplicant (client to be authenticated) in [Supplicant Setting].

This setting is displayed when [Network I/F Configuration] is set to [Wireless Only]. In a wireless-only environment, if [WPA-EAP(AES)] or [WPA2-EAP(AES)] is selected in [Wireless Network Setting] - [Manual Setting] - [Authentication/Encryption Algorithm], configure the supplicant settings. For details on [Wireless Network Setting], refer to [Wireless Network Setting] .

Settings

Description

[User ID]

Enter a user ID (using up to 128 characters).

This user ID is used for all EAP-Type options.

[Password]

Enter a password with 128 characters.

The password is used for all EAP-Type options other than [EAP-TLS].

[Server ID]

To verify CN of the certificate, enter the server ID (using up to 64 characters).

[EAP Type]

Select an EAP authentication method.

  • [Depend on Server]: The EAP-Type provided by the authentication server will be used for authentication. Configure the supplicant settings as required for this machine according to the EAP-Type provided by the authentication server.

  • Do not select [No].

[No] is specified by default.

[EAP-TTLS Internal Authentication Settings]

Configure the EAP-TTLS settings if [EAP-Type] is set to [EAP-TTLS] or [Depend on Server].

  • [User ID]: Enter the user ID used for EAP-TTLS authentication (using up to 128 characters).

  • [Protocol]: Select an internal authentication protocol for EAP-TTLS.

[Client Certificates]

Select whether to encrypt the authentication information using a certificate for this machine, if necessary.

This setting can be configured if the following conditions are satisfied:

  • The certificate is registered on this machine

  • [EAP-TLS], [EAP-TTLS], [PEAP], or [Depend on Server] is selected from [EAP-Type].

[Encryption Strength]

If [EAP-TLS], [EAP-TTLS], [PEAP], or [Depend on Server] is selected from [EAP-Type], select an encryption strength for encryption by TLS, if necessary.

  • [Mid]: Keys that are more than 56 bits in length are used for communication.

  • [Strength]: Keys that are more than 128 bits in length are used for communication.

[Certificate Verification Level Settings]

To verify the certificate, select items to be verified.

If you select [Confirm] at each item, the certificate is verified for each item.

  • [Expiration Date]: Confirm whether the certificate is within the validity period. [Confirm] is specified by default.

  • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address. [Do Not Confirm] is specified by default.

  • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default.