* Enter the name of the utility key. You can search descriptions of utility keys.

Filtering Settings

To display: [Utility][Administrator Settings][Network Settings][TCP/IP Settings][Filtering Settings]

Configure a setting to restrict accesses from the network to the machine.

Settings

Description

[Filtering Type]

Select the method to restrict accesses from the network.

  • [IP Address Filtering]: Restricts devices that can access this machine depending on the range of IP addresses.

  • [Quick IP Filtering]: Restricts devices that can access this machine using the IP address (IPv4/IPv6). The range of IP addresses for which access is to be restricted is specified automatically.

  • [Packet Filtering]: Restricts a reception of packets sent to the machine depending on the source address. This function also restricts sending depending on the destination address.

  • [No Filtering]: Does not perform filtering.

[No Filtering] is specified by default. In some area, [Quick IP Filtering] is specified by default.

[Settings]

Configure a setting for each filtering type.

[IP Address Filtering]

Configure IP address filtering.

For details, refer to [IP Address Filtering] .

[Quick IP Filtering]

Configure quick IP filtering.

For details, refer to [Quick IP Filtering] .

[Packet Filtering]

Configure packet filtering.

For details, refer to [Packet Filtering] .

IP Address Filtering

Quick IP Filtering

Packet Filtering